dual 1 or dual 2?

[youngb94 0]

Im getting ready to order the Fi 15 BL, i have a 1000/1 jl audio amp. Im not sure which is better dual 1 or dual 2 ohm? Is one better than the other, or does it not really matter?

[mbarber25 29]

it's not that one is better than the other.

but, get it in dual 1 so you can wire it to 2ohms

[KU40 173]

You'll want dual 1

[SentraGuy 0]

You'll want dual 1

But what if his amp is stable at 1 ohm? Then he could get D2 and wire it to 1 ohm. Right?

[mbarber25 29]

You'll want dual 1

But what if his amp is stable at 1 ohm? Then he could get D2 and wire it to 1 ohm. Right?

JL amps are only stable at 1.5 ohms - 4 ohms

[SentraGuy 0]

You'll want dual 1

But what if his amp is stable at 1 ohm? Then he could get D2 and wire it to 1 ohm. Right?

JL amps are only stable at 1.5 ohms - 4 ohms

Hmm. Didn't know that.

[mbarber25 29]

You'll want dual 1

But what if his amp is stable at 1 ohm? Then he could get D2 and wire it to 1 ohm. Right?

JL amps are only stable at 1.5 ohms - 4 ohms

Hmm. Didn't know that.

yea it's different I guess.

I ran a JL amp a couple months ago and it was wired to 1ohm and whenever the impedance would drop too far or whatever it'd just go into protect.

[youngb94 0]

so i would need to wire that in series?

[jcarter1885 995]

so i would need to wire that in series?

Yes wire it in series to 2 ohms.

[KU40 173]

so i would need to wire that in series?

Yes wire it in series to 2 ohms.

Not sure who voted this post of yours down to -1, but I evened it back out.

[youngb94 0]

thank you for everybody's help I am just waiting for my sub to show up now.

[raolito1980 2]

thank you for everybody's help I am just waiting for my sub to show up now.

I will be running the exact SUB and amp here real soon. I'm glad I caught this thread cause I was about to order the dual 2ohm.