Looking for a setup kinda like this

[folgrz 0]

how much do you think a setup like this would cost i just want a wall going across my trunk (for 2 12" RL-P's) like in the pictures and maybe when i fold down my seats ill put some plexiglass so you can look at the subs but if it costs too much then its out of the question

[psycho72 1]

how much do you think a setup like this would cost i just want a wall going across my trunk (for 2 12" RL-P's) like in the pictures and maybe when i fold down my seats ill put some plexiglass so you can look at the subs but if it costs too much then its out of the question

<{POST_SNAPBACK}>

cardboard is your friend. Get empty boxes from a nearby warehouse and make templates for everything, that way you can get a perfect fit and not waste a bunch of time installing, removing, recutting, reinstalling, etc. wood. Also I personally used 1/2" thick plywood for all the faces to save weight. The box is still 3/4" MDF but the plywood saved a good bit of weight. 3M spray glue and carpet, long hours, lots of cussin, some good jams and viola, in a couple of weeks exactly whats in the pics.

[folgrz 0]

never thought about using the cardboard thing

very clever, sounds good im gonna try doing that today

[folgrz 0]

well i tried fitting some cardboard in my trunk today and i ran into a couple of problems. In my car there are 2 rods that go across my trunk and when they close they push right up agaisnt the cardboard.

so i was wondering how i can resolve this ill try to get a couple of pictures up, but the wall is going to be 41" across and it looks like about 22" high but i want the wall to be shaped around my wheel well like in the 2nd picture above