I was only kidding

[djjdnap 78]

That was the 1st box i ever made on that other thread, lol, i dont think i ever tried it out, hmm. but here are the real pics

The port looks extra small if you ask me.But its sposed to be 32hz

Now i'm not sure if i want to add in this extra piece right here are not, if i do i have to cut it at an angle because the subs depth is more than my ports length

Ply wood

Did that even look like an 18in hole to u guys, ahh come on now

Oh and does this need bracing of coarse

[02BlackOnBlackSS 1]

That port looks way off. Crooked as hell. Straighten up the port and make it go further back and then bend it at a 90 degree angle if you have to. And if that's for 2 sx 18's then you will need way more port area.

[djjdnap 78]

its not nailed down, yet.

I dont have room to make the port any bigger.

And from what i calculated that is the correct port length, to make it 32hz.

The one piece is just something i was gonna add on, but prolly wont.

[Supa_c 1]

Was the plywood a dual 12 ?

Not much port area for 2 18's there pal.

[djjdnap 78]

yea, it was a dual 12.

I dont get how u can have more port area, but keep the same tuning?

I mean i can change every aspect of it x*x*x, but its still going to be the same? correct?

like now it is 3.5x25x6.8

ok i'll calc some more specs here,

4x20x5.66

5x25x11

^^i think that would be the maximum i could get since i only have 43.5 across the front, the subs would be touching prolly also.

I guess its not alot of port area because my width can only be 3.5-4

p.s.

Me getting flamed for no reason on CA.com about the box

http://forums.caraudio.com/vb/showthread.p...00&page=2&pp=15

[djjdnap 78]

Oh yea and how should i brace this thing.

someone suggested only the baffle, that is the piece where the subs go correct?

someone else suggested adding pieces to the wall.

I was thinking of just adding pieces to the sides where the box came together and maybe to pieces runing from top to bottom.