Masterofallbass's Build w/ XXV Maxxmus

[masterofallbass 0]

My Current System

2 AQ HDC315-A Subs

1 XXV Maxximus

7 Kenetik 1800 Batts

Big 3 In 0 Gauge

4 Runs of Power & Ground Wire (0 Gauge) (Each)

5.5 Cb Foot Box After Displacements 38Hz w/ 2 6inch aeros

2008 Jeep Grand Cherokee Laredo SUV

270 "XP" Amp Alt From Dc Power

This spring im doing 4 18's AQ Hdc3 New Coppers Off the XXV Maxximus.

Tons of pics. Sorry some not in order

Almost done with the current system. Just need to build an amp rack.

Box Is a test box. Many to come. Trial and error. See what works best for the aq's all this power

Also i would love some input on this. Thanks

Edited October 28, 2009 by 08 Jeep Grand Cherokee

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[masterofallbass 0]

[porkchop 304]

looking good.... what paint ( black ) and technique did you use for the base...... ?

nice work and nice build thread...

keep it coming

chop

[masterofallbass 0]

looking good.... what paint ( black ) and technique did you use for the base...... ?

nice work and nice build thread...

keep it coming

chop

The paint? The paint color is black magic gloss (water base). White primer (water base)

[djphilly 11]

Are you running wire under the car through the wheel well with no protection? If so, I wouldn't think that is a good idea. my two cents

[masterofallbass 0]

Are you running wire under the car through the wheel well with no protection? If so, I wouldn't think that is a good idea. my two cents

kinda, theres rubber calking around the holes

[djphilly 11]

Are you running wire under the car through the wheel well with no protection? If so, I wouldn't think that is a good idea. my two cents

kinda, theres rubber calking around the holes

all the cable is exposed to the elements. kinda dangerous if consider, rain, puddles, road hazzards, etc.

[masterofallbass 0]

Are you running wire under the car through the wheel well with no protection? If so, I wouldn't think that is a good idea. my two cents

kinda, theres rubber calking around the holes

all the cable is exposed to the elements. kinda dangerous if consider, rain, puddles, road hazzards, etc.

are u talking about the runs being under my truck? Alot of people do it. I have 8 runs from front to back. No way its going to fit under my carpet

[todd.brust 29]

Wow, that's a complete overhaul since September.

[masterofallbass 0]

Wow, that's a complete overhaul since September.

yes sir! Btw im geting my own termlab by spring. Im going to fine tune this beast

[jcarter1885 995]

Im tuned in just making some and drinking a , more pictures.

[tejcurrent 13]

Looking good, I would seriously consider some rubber around those wires in the floor for the sake of safety.

Other than that looks like a lot of work. I think we have similar amps

[slim2fattycake 85]

I'd be more protective of those wires too. At a recent competition, someone's interior almost caught on fire because something was wrong with the wire outside the car. But good build and damn those amps are big.

[djphilly 11]

Are you running wire under the car through the wheel well with no protection? If so, I wouldn't think that is a good idea. my two cents

kinda, theres rubber calking around the holes

all the cable is exposed to the elements. kinda dangerous if consider, rain, puddles, road hazzards, etc.

are u talking about the runs being under my truck? Alot of people do it. I have 8 runs from front to back. No way its going to fit under my carpet

I said the same thing. to each is own.

[masterofallbass 0]

I'd be more protective of those wires too. At a recent competition, someone's interior almost caught on fire because something was wrong with the wire outside the car. But good build and damn those amps are big.

humm anyone know where i can get them rubber things? But some of the holes are realy big. so i need somthing to work. Should i put rubber pipe tubing around them at the holes?