Need help on subs

[jonathan_76179 0]

Okay well i just made a pre-order on the sundown audio sae-1200 v.2 and wanted to hook it up to two 12 Fi Qs in my truck. From what i've read in some posts, I should order the dual 2 right? Or should i get the dual 1? Please help me out. Thank you.

[jonathan_76179 0]

* 1200 x 1 watts @ 1 ohm

* 600 x 1 watts @ 2 ohms

* 300 x 1 watts @ 4 ohms

* 0.153v - 5.6v adjustable input sensitivity

* 15 Hz - 250 Hz Frequency Response

* > 90 dB S/N Ratio

* 4-Way Protection Circuit (Thermal, Overload, Speaker Short, and Over Current)

* 50 Hz - 250 Hz adjustable 12dB Low-Pass Crossover

* 15 Hz - 50 Hz adjustable 12dB Subsonic Filter

* 0 or 180 degree adjustable phase switch

* 0 - 12 dB adjustable bass boost with 60 Hz center frequency

* Wired Remote Control unit included

* 5x 30 Amp Internal Fuses

* 17" L x 10.6" W x 2.2" H

Those are the specifications for the amp.

[thebiggmann12 14]

dual 2

[jcarter1885 995]

Okay well i just made a pre-order on the sundown audio sae-1200 v.2 and wanted to hook it up to two 12 Fi Qs in my truck. From what i've read in some posts, I should order the dual 2 right? Or should i get the dual 1? Please help me out. Thank you.

Naw you get the dual 1 ohm version (wire each sub in series to 2 ohms and then when the wires are added together they will drop down to a 1 ohm load.

[jcarter1885 995]

dual 2

Not if he has two subs, then he will want dual 1 ohm subwoofers.

[jonathan_76179 0]

Alright thanks. The diagram is cool too. Thanks Jay-cee.

[thebiggmann12 14]

good call...i didnt see that he had 2.