kicker zx1000.1

[danstow1 0]

has any 1 Sean a berth sheet from a zx1000.1 what was its top rms and @ how many volt's. And are they 1ohm stable

Edited October 24, 2009 by danstow1

[thebiggmann12 14]

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

[danstow1 0]

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

[jcarter1885 995]

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

Yeah a kicker zx1000.1 is 2 ohms stable (dont worry about what birth sheets say because if you try and run it at that power you will run into clipping (plus they just test one amp out of every 20 or 50 or so and write that number down as all amps birth sheet results). Actually it doesnt suck regardless the company brand your running with it because of its 2 ohm final load, what matters is the voice coil configuration that you have? I wouldnt buy a kicker amp either since they have set SubSonic Filters and you cant adjust them which will require you to tune your enclosure around the sub sonic filter instead of your liking.

[danstow1 0]

no they are not 1 ohm stable..i dont remember what volts it was but it was 1298 watts rms on my birthsheet.

really they are not 1 ohm stable that kinda sucks where you useing it to run an fi

Yeah a kicker zx1000.1 is 2 ohms stable (dont worry about what birth sheets say because if you try and run it at that power you will run into clipping (plus they just test one amp out of every 20 or 50 or so and write that number down as all amps birth sheet results). Actually it doesnt suck regardless the company brand your running with it because of its 2 ohm final load, what matters is the voice coil configuration that you have? I wouldnt buy a kicker amp either since they have set SubSonic Filters and you cant adjust them which will require you to tune your enclosure around the sub sonic filter instead of your liking.

so jay Cee what would you sagest to run 2 L5 12's dual 2 ohm

[jcarter1885 995]

Any amp within both subs rms range or more for headroom, it has to be 2 ohm stable with an adjustable sub sonic filter and underrated that fits inside your budget. What budget are you working with?

[Notorious97200 339]

The zx 1000 or 1500 should be enough for these 2 subs, if you're set on Kicker.

You just need an amp that can make 1000-1500 watts at 2 Ohms.

If you don't have the sub yet, you can still make another choice.