2 Fi BL15's

[4000watts 0]

Im tryna purchase 2 Fi BL 15's and i have a power acoustik BAMF40001/D...Im wondering how I should wire the voice coils and would it be better to get a dual1 or dual2???...This is for daily use also

[jcarter1885 995]

Im tryna purchase 2 Fi BL 15's and i have a power acoustik BAMF40001/D...Im wondering how I should wire the voice coils and would it be better to get a dual1 or dual2???...This is for daily use also

Get Dual 1 ohm subwoofers, wire each of them in series to 2 ohms and they will drop down to 1 ohms at amp since the amp is 1 ohm stable.

[4000watts 0]

preciate it..but how can u power a negative and a positive..i thought that would put the amp in protectiion

[jcarter1885 995]

Naw what puts an amp into protection is usually wrong ohm load wiring and some other things but not that.

[4000watts 0]

aw aight....1 mo question..wiring in series give you 1 positive and 1 negative wire to go into the amp right...would you just not use the other 2 speaker inputs on the amp and leave them open??

[jcarter1885 995]

aw aight....1 mo question..wiring in series give you 1 positive and 1 negative wire to go into the amp right...would you just not use the other 2 speaker inputs on the amp and leave them open??

Its two ways to do it:

Option #1:

You wire each sub individually, one to each set of the amps terminals and let the amp drop the 1 ohm load (no speaker terminals will be left unused).

Option #2:

You wire each sub individually then together before it reaches the amp to drop to 1 ohm load, to one set of speaker terminals (one set of speaker terminals will be left unused).

[4000watts 0]

Aight..Preciate it Jay-Cee

[jcarter1885 995]

No problem man, good luck on the install and dont forget to spoil us with a build log or pictures.