Amp/Sub match

[truly_giftd85 0]

I wanna run 3 SSd 15s dual 2ohm (Copper coil and BP option) on a RF T 2500-1BD. Is this a good combination? Will it be too muh power or too little?

[KU40 173]

Should be about right. if you get d2 coils, wire each sub's coils in series then all the subs in parallel, you'll get a 1.33 ohm load. That amp will probably put out about 2200 watts at that impedance, or a little over 700 per sub. That's just about right.