making the most out of this amp.

[porkchop 304]

Crunch Powerzone P 900.4

4-Channel Amplification

900W 2 / 3 / 4-Channel A/B Class Amplifier

115W x 4-Ch @ 4-Ohms or

225W x 4-Ch @ 2-Ohms or

450W x 2-Ch @ 4-Ohms Dynamic Music Watts

we have this and (2) IA 187 12"s ..... dual 4ohm.

what do i need to do to wire the two subs in order to get the most out of this amp?

thanks Chop

[jcarter1885 995]

Crunch Powerzone P 900.4

4-Channel Amplification

900W 2 / 3 / 4-Channel A/B Class Amplifier

115W x 4-Ch @ 4-Ohms or

225W x 4-Ch @ 2-Ohms or

450W x 2-Ch @ 4-Ohms Dynamic Music Watts

we have this and (2) IA 187 12"s ..... dual 4ohm.

what do i need to do to wire the two subs in order to get the most out of this amp?

thanks Chop

It looks like the only option I came up with is each sub on its own channels (two channels wont be used), wire the subs in parallel to 2 ohms.

[porkchop 304]

so you are saying it will be doing 225 then? i think he reall wanted to get more out of it, kinda sucks, he got it dirt cheap.

[porkchop 304]

if i was to bridge one side at 425 watts and use other a two channels for like his mids, what do you think?

[jcarter1885 995]

Yeah regardless of how you wire your subs to that amp, they will only take up to channels of that amp. The other two channels will be open for anything, good luck.

[porkchop 304]

[ppiflat10s 3]

Id bridge the rear channels and wire the subs to a 4 ohm load instead of running them in 2 ohm stereo

[porkchop 304]

looking toward doing that^^^^, raining today and he will not bring it out in the rain.

[jcarter1885 995]

looking toward doing that^^^^, raining today and he will not bring it out in the rain.

That sucks, tell him to stop holding out (weather never stops an install). Just playing