Jump to content
Sign in to follow this  
Maggotpuffin

Spl from an L7 15

Recommended Posts

I have 1 06 Kicker L715 in a ported box in a 2004 Isuzu Rodeo. Im gonna build a new box first the measurments are Build the enclosure to internally measure 5.0 cubic feet. Use a port opening that measures 50 square inches (3" X 16") and a port length that measures 15" deep into the enclosure. Im looking for a little sq but mostly spl. Its goona be tuned to 33hz. Is that good for what im looking for. My amp is a KX1200.1 and its wired down to 1 ohm. Thanks for any input

Share this post


Link to post
Share on other sites

Sure sounds good.

Please i need more advice. My suv is almost completly stock except for my L7 15 and my KX1200.1 ive got 4 gauge monster cable power and 4 gauge ground. Any tips for getting better spl

Share this post


Link to post
Share on other sites

need more port area for more spl.

If building to 5cubes Net, you will want a minimum of 80sqin and around 140sqin for competition.

I don't know about how the L7s sound but more SPL in a daily setup would mean you want it tuned higher than 33hz, preferrably around 37hz minimum.

With the info i gave, the port depth is meaningless now.

Share this post


Link to post
Share on other sites

need more port area for more spl.

If building to 5cubes Net, you will want a minimum of 80sqin and around 140sqin for competition.

I don't know about how the L7s sound but more SPL in a daily setup would mean you want it tuned higher than 33hz, preferrably around 37hz minimum.

With the info i gave, the port depth is meaningless now.

so how what dimensions would you use its going to buy a daily driver but if i ever go into a competition i would like to hit as many dbs as possible.

Share this post


Link to post
Share on other sites

i had a buddie that had a cvr kicker 05 06 and it was put at 32hertz the boxfoot was around 5 cf and it hit around 146 and it would goo sooo low it would make your nutz go into your stomch

pretty bad ass woffer if you ask me though

Share this post


Link to post
Share on other sites

i had a buddie that had a cvr kicker 05 06 and it was put at 32hertz the boxfoot was around 5 cf and it hit around 146 and it would goo sooo low it would make your nutz go into your stomch

pretty bad ass woffer if you ask me though

he had 1 cvr in that and it hit 146?

Share this post


Link to post
Share on other sites

Sure sounds good.

Please i need more advice. My suv is almost completly stock except for my L7 15 and my KX1200.1 ive got 4 gauge monster cable power and 4 gauge ground. Any tips for getting better spl

1/0 wiring and try another battery for starters. If you want to get everything, you need to experiment with different tunings, box sizes and positions. If you have access to a TL to try these, it's going to be rather simple to increase your score.

Share this post


Link to post
Share on other sites

Sure sounds good.

Please i need more advice. My suv is almost completly stock except for my L7 15 and my KX1200.1 ive got 4 gauge monster cable power and 4 gauge ground. Any tips for getting better spl

1/0 wiring and try another battery for starters. If you want to get everything, you need to experiment with different tunings, box sizes and positions. If you have access to a TL to try these, it's going to be rather simple to increase your score.

i dont know where a term lab around where i live is. I live in orlando florida. What kind of battery should i get to replace my stock one? Im probably going to buy kicker 0/1 guage i found the kit brand new for 120.

Share this post


Link to post
Share on other sites

Sure sounds good.

Please i need more advice. My suv is almost completly stock except for my L7 15 and my KX1200.1 ive got 4 gauge monster cable power and 4 gauge ground. Any tips for getting better spl

1/0 wiring and try another battery for starters. If you want to get everything, you need to experiment with different tunings, box sizes and positions. If you have access to a TL to try these, it's going to be rather simple to increase your score.

i dont know where a term lab around where i live is. I live in orlando florida. What kind of battery should i get to replace my stock one? Im probably going to buy kicker 0/1 guage i found the kit brand new for 120.

go to weldingsuply.com

im using there 2/0 stuff and its better and thicker than kicker for 1/3 the price.

Share this post


Link to post
Share on other sites

i had a buddie that had a cvr kicker 05 06 and it was put at 32hertz the boxfoot was around 5 cf and it hit around 146 and it would goo sooo low it would make your nutz go into your stomch

pretty bad ass woffer if you ask me though

he had 1 cvr in that and it hit 146?

at 33hz :bull:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×