Jump to content
Sign in to follow this  
gamapimp

15" fi bl and rockford t15001bd

Recommended Posts

I currently have a bl 15 i know its rated at 1000 watts but i have a rockford t1500 and the sub can only be wired to 1 or 4 ohm. can the subwoofer take the whole 1 ohm load from this amp. if i turn the gains down on the amp does that reduce the amount of power going to the sub or will i still feed it the 1500 watts+ either way.

Share this post


Link to post
Share on other sites

I currently have a bl 15 i know its rated at 1000 watts but i have a rockford t1500 and the sub can only be wired to 1 or 4 ohm. can the subwoofer take the whole 1 ohm load from this amp. if i turn the gains down on the amp does that reduce the amount of power going to the sub or will i still feed it the 1500 watts+ either way.

The BL is rated at 1500 watts thermal power handling. Just get your gain right.

Share this post


Link to post
Share on other sites

Turning the gain down from its actual match to your signal voltage will reduce power output.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×