SAZ-2000 vs SAZ-1000

[Megavanman 2]

hey whats up i need help choosing an amp(s) for my setup, my electrical upgrades are big 3 1/0 gauge, 2 runs 1/0 gauge 1 pos 1 neg, 200 amp alt, optima yellow top front,die hard platinum p1 in back, k i have 4 dual 4 ohm subs kicker 15 15's, i need an amp decision i either want a saz-2000, i would have to run it at .5 ohms will my electrical handle that, and hit hard, or should i go with 2 saz-1000 and both amps would be wired down to 1 ohm, which setup would b louder and which would work the best

[CrazyKenKid 64]

i would just get 2 saz1000d and run them straped at 2ohm (each amps will see a 1ohm load) it will be a lot safer and you will not void warrenty ( .5ohm = no more warrenty) but that is just my input on your question!

Edited August 20, 2009 by CrazyKenKid

[///M5 2,833]

If you have to ask that question you shouldn't run an amp at 0.5ohm. Go with the 1ohm solution.

[MKader17 332]

If you have to ask that question you shouldn't run an amp at 0.5ohm.

x2

2 SAZ 1000's Strapped to 2 ohms

[Duran 387]

How many of the exact same thread are you gonna make?

[///M5 2,833]

How many of the exact same thread are you gonna make?

Double thread making gets you a vacation from the site. Don't do it.

[Megavanman 2]

my bad guys im new to the spl scene wont happen again

[Aaron Clinton 2,372]

my bad guys im new to the spl scene wont happen again

Just take your time, and we can help work through each road block you might have.