Jump to content
Sign in to follow this  
kwschs

Amps

Recommended Posts

Jacob recommend I throw 2 12 SA D4's in my 3 series BMW, and I am going to place the order, but what should i use to power them? Should i just get 1 amp (1500) or get two 1000's. The amp is going to be a sundown model so that's what we are working with.

Share this post


Link to post
Share on other sites

get the 1500! those bad boys are so under rated!!

it does 1970rms at 12.8volts!!

Share this post


Link to post
Share on other sites

yea... that's a 0.5 ohm nominal load too which isnt recommended for daily driving.

the saz-1500d is still a good choice for such install.

Any 1200-2000w that is capable of doing rated power at 1ohm or bridged at 4 ohm is fine as long as you have the electrical system for it.

Share this post


Link to post
Share on other sites

yea... that's a 0.5 ohm nominal load too which isnt recommended for daily driving.

the saz-1500d is still a good choice for such install.

Any 1200-2000w that is capable of doing rated power at 1ohm or bridged at 4 ohm is fine as long as you have the electrical system for it.

So putting two of those 4 ohm subs on the 1500d will make it a .5 ohm load? I don't really like the idea of running it that low, what do you recommend? Can't i just wire both so the load is still 4ohm?

Share this post


Link to post
Share on other sites

no, that 1900w rating that was mentioned was on a 0.5 ohm load.

Dual 4 ohm subs can be wired to 1ohm so you're fine.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×