FI BTL 15" Enclosure Design

[mklett33 32]

Just drew this up on sketch up, 5 cubic feet tuned to 32 Hz with port dimensions 5 Wide x 16 High x 34 Long... Wondering what you guys think!

[antonmiller 8]

Just drew this up on sketch up, 5 cubic feet tuned to 32 Hz with port dimensions 5 Wide x 16 High x 34 Long... Wondering what you guys think!

looks good but i would put corner pieces in the corners with the arcs as well, more for strength than anything.

[Duran 387]

You need bracing in there.

[shizzzon 461]

yes, get a 2x4 and stand it straight up to the right inside that box and keep it just to the right of the magnet viewing from front of box.

Run a small run of all-thread from the right wall to the 2x4 and then run another run from the 2x4 to the back wall.

Make sure the 2x4 meets the top of the box as well so you will have the top, bottom, side and back braced.

[mklett33 32]

Very good additions, thinking double baffle as well