help with imaging

[dennisp 0]

i have 3 seats in the front bench of my truck. when i sit in the middle, the imaging is pretty good. the singer's voice is in the center, guitars/drums/etc in their proper places. however, when i sit in the driver's seat, the horizontal bias is horrible. sometimes i hear the left tweeter a lot since its pretty close to my head (a-pillar), other times i hear my right mid over everything else (maybe cuz its more on axis?). the tweeters arent mounted for perfect imaging rite now cuz i dont have time to glass the flush mount cups to the a-pillars. theyre mounted above ear level and kinding pointing to the stomach of the middle seat so maybe thats the cause? lemme know whatcha think. i will eventually redo the a-pillers. thanks guys <3

[Supa_c 1]

I already told you what to do

If you guys wondered:

use the time anlignment and mess around with the balance

[dennisp 0]

but theres no separate time alignment for the tweet and mid! i dont understand.

is the TA measured from the mid or tweet on the HU?

[Supa_c 1]

Time alignment is for the channel iirc

[jntar 15]

i have 3 seats in the front bench of my truck. when i sit in the middle, the imaging is pretty good. the singer's voice is in the center, guitars/drums/etc in their proper places. however, when i sit in the driver's seat, the horizontal bias is horrible. sometimes i hear the left tweeter a lot since its pretty close to my head (a-pillar), other times i hear my right mid over everything else (maybe cuz its more on axis?). the tweeters arent mounted for perfect imaging rite now cuz i dont have time to glass the flush mount cups to the a-pillars. theyre mounted above ear level and kinding pointing to the stomach of the middle seat so maybe thats the cause? lemme know whatcha think. i will eventually redo the a-pillers. thanks guys <3

<{POST_SNAPBACK}>

Until you set up the imaging correctly the only thing I can think to recomend is the fade and balance. If your left side (tweet or midbass) is soundlig louder move the balance over to the right a few notches Do the same for the right side when it occures.

I know it is a pain to have to constantly change, but if you do not have the time alignment and the imaging isnt correct its really the only thing that I can think of.

[Tirefryr 1,742]

Might want to try changing phasing as well. This has been a huge help to me in the past. Crossover points and slopes as well.

[dennisp 0]

thanx yall. i started my proper A-piller mounting today, gonna glass in the flush mount pods tweets pointing at opposite headrest. i'll let ya know how it goes. will work with phasing/TA if that doesnt help.

[dennisp 0]

some kitty hair i got off a cat. meowza!

[Supa_c 1]

Woah !

There furry

[dennisp 0]

i screwed up on the first batch and wasted a lot of the cat's fur. too much hardener on a hot day.

now i see why everyone says it gets really hot inside a plastic cup, crazy stuff.

[Supa_c 1]

Yep, ask steve about his cup

[dennisp 0]

SANDING = HELL

[Supa_c 1]

Doesnt look like anything

[dennisp 0]

i would do a closeup, but then u wouldnt stop making fun of it.

[Supa_c 1]

why would i make fun, ive never done it before

[EFFENDI 0]

those look like they are going to be mounted pretty high up, you sure you want all that tweeterness blasting in your ears???

[dennisp 0]

too late now.

i have no one to help me with stuff so i'm eyeballing stuff most of the time. sux.