need help finding a video

[Lucky 76 5]

i was told there was a video online of an explorer with 4 18s ... i wanted to view this because i drive an aviator which is basically lincoln's version ... i wanted to reference how he made the wall as i plan on building a wall hopefully in mine ... i dont think he did a straight wall because there isnt enough height to stack 2 straight up ... if anyone has any information please let me know thanks

[mwerling1212 1]

i found a video of 4 18's in an expedition if that helps.

Edited July 28, 2009 by mwerling1212

[shizzzon 461]

if u need help fitting 4 18s on a baffle, give me the maximum dimensions that i could use on the baffle, the external dimensions, that i can attach the side walls too!

If your vehicle contours up higher in the middle, let me know those dimensions, etc...

I need dimensions so i can draw a blueprint of it so i can find out how 4 18s would go in your ride.

[mikey5472 16]

I think I saw one on YouTube with 4 18in btls in a clamshell.

[Lucky 76 5]

these are the dimensions i have to work with ... this would be if i was to build the box inside the car which i am most likely going to have to do ... i am also willing to use birch instead of mdf so we do not need more layers of wood

front baffle - 38 high x 47 wide

back - 35.25 high x 38 wide

i forgot what the middle piece was ... i will have to look again ... i have written down 20 x 47.5 which cant be right ... odds are it is 30

depths

from top - 21

from middle - 30

from bottom - 36

this will probably only add up to around 21-22 cu ft

i also have a 15 wide X 24 long X 12 high area if i took out the middle seat to the back of where the wall would go ... this could be where the port would come out i guess

this is like 1.5 cu ft or so i would imagine

thanks again shawn