What would be louder

[4X4AUTIGER 0]

Would 1 10" bl with cooling and flatwind coil in a 1.4 cuft box tuned to 32hz be louder than 2 10" ssds in a 1.8 cuft Tuned to 33hz? Also what would be the ideal port area for the ssds if I put them in a box with two ports? Thanks

[jcarter1885 995]

Would 1 10" bl with cooling and flatwind coil in a 1.4 cuft box tuned to 32hz be louder than 2 10" ssds in a 1.8 cuft Tuned to 33hz? Also what would be the ideal port area for the ssds if I put them in a box with two ports? Thanks

2-10" ssd's in my opinion, you would need anywhere between 21.6in^2 - 28.8in^2(divide that in two if you want to make two ports).

[Spencerk 4]

2- 10s more air = more boom

[4X4AUTIGER 0]

awesome! but could i go any smaller than 1.8cuft? im really pressed for space since these are going under my rear f150 seats

[Spencerk 4]

if i were you i would just go with one of those MTX thunder forum or whatever their called they make them for 2 10s unless you want to get into some fab work. Plus the look like something that came with the truck...they look clean and stealthy. as far as space I wouldn't go less than 1.6 MINIMUM

[4X4AUTIGER 0]

well i already put in my seat lift and have my amp (sundown audio sae1200d) but im still looking for the right sub/ subs. I want either 2 10s with 600w rms handling and 6" mounting depth and require like .7 cuft ported or 1 10 or 12 with 1500w rms and 6.25" mounting depth and 1.4 cuft ported

[jcarter1885 995]

well i already put in my seat lift and have my amp (sundown audio sae1200d) but im still looking for the right sub/ subs. I want either 2 10s with 600w rms handling and 6" mounting depth and require like .7 cuft ported or 1 10 or 12 with 1500w rms and 6.25" mounting depth and 1.4 cuft ported

good with what can fit because crampped subs in a small box will not sound to good or give you the best output. just my .02

[4X4AUTIGER 0]

well i already put in my seat lift and have my amp (sundown audio sae1200d) but im still looking for the right sub/ subs. I want either 2 10s with 600w rms handling and 6" mounting depth and require like .7 cuft ported or 1 10 or 12 with 1500w rms and 6.25" mounting depth and 1.4 cuft ported

good with what can fit because crampped subs in a small box will not sound to good or give you the best output. just my .02

alright yeah i think im gonna go with the 10" Bl with cooling and flatwind

[slim2fattycake 85]

Don't forget you have to subtract port volume from the total volume of the box too.

[jcarter1885 995]

Don't forget you have to subtract port volume from the total volume of the box too.

and the sub woofers displacement also

[slim2fattycake 85]

Don't forget you have to subtract port volume from the total volume of the box too.

and the sub woofers displacement also

lol and bracing.

[jcarter1885 995]

Don't forget you have to subtract port volume from the total volume of the box too.

and the sub woofers displacement also

lol and bracing.

x2

[4X4AUTIGER 0]

yeah i factored all that in except for bracing... i didnt think i needed it since the box is like 2.2 cuft

[jcarter1885 995]

yeah we were just joking for your situation (but for some people who dont know that those values must be thrown into the equation when building a ported enclsosure).