Fast Help

[mbarber25 29]

ok want to install my amp but i'm not sure where to put the phase at.

i have a SAZ-2000D

should i just leave it at 0? or where's a good place to put it?

i should know what it is. BUT I DON'T :/ maybe i'm missing something here lol

thanks!

[mbarber25 29]

not bumping

but moving it to recent discussions or whatever

[ncacoates 104]

leave it at 0 which should be turned all the way to the left. also leave the bass boost off.

[mbarber25 29]

leave it at 0 which should be turned all the way to the left. also leave the bass boost off.

ok thanks

read something about the phase but wasn't sure. and bass boost is always at 0

oh and one more thing since i already started a topic

subsonic? i was gunna put it at like 28hz (my box is tuned to around 33hz)

or should i go higher?

[KU40 173]

If you go higher with the subsonic you'll start to lose music above the box's tune. I wouldn't go any higher than 28. Maybe even 25.

As for phase, that depends entirely on how the sub interacts with your front stage. You set the phase so that the sub is in phase with the interior speakers. This just takes messing with it. It's not a bass boost, gain, or anything. No setting that you put it on will hurt the sub. So just mess with it until it blends the best with the midbass from your other speakers.

[jcarter1885 995]

did you install the amp today or just getting the settings straight?

[mbarber25 29]

did you install the amp today or just getting the settings straight?

nah, just getting the settings straight