just ordered 18btl dual1 fully loaded which amps do i need to run 0.5o

[MIKE W 0]

i was wonderin if i could use two of the same amps 1000rms to each [email protected]

[mbarber25 29]

.5 ohms is a bad idea.. just get a kicker kx.2500.1.. will be safer in the long run.. spend a little extra now instead of buying amps now and running them at .5 ohms and frying them.. then you'll really be screwed

ORRRRRR.

e-mail Fi.. if it's not too late.. and request your order to be changed to the Dual 2 option.. then you can find a cheaper amp that is rated it 1ohm etc etc

Edited July 8, 2009 by mbarber25

[jcarter1885 995]

we are answering your questions in one topic, why make another one right after it. just ask all the questions in the same topic and someone will get to you eventually.

[mikey5472 16]

If you are going to buy another sub you could get the saz-4500, and run it at 2 ohms until you get the second sub. Then run both of the subs off the 1 amp at 1 ohm.

Edited July 8, 2009 by mdizzle5472

[mbarber25 29]

Tip: click inside this box to load the editorIf you are going to buy another sub you could get the saz-4500, and run it at 2 ohms until you get the second sub. Then run both of the subs off the 1 amp at 1 ohm.

yea. what he said

or do the same with a saz-3500 since the 4500 might be out of your budget

Edited July 8, 2009 by mbarber25

[rodneydude23 5]

mdizzle5472, on 08 July 2009 - 12:04 AM, said:

Tip: click inside this box to load the editorIf you are going to buy another sub you could get the saz-4500, and run it at 2 ohms until you get the second sub. Then run both of the subs off the 1 amp at 1 ohm.

yea. what he said

or do the same with a saz-3500 since the 4500 might be out of your budget

that and it doesn't come out for months. He Just ordered his sub I think he wants to play with it.