SA-12s In Stock

[sundownz 197]

They are here! Will be shipping them over the next few days.

[sundownz 197]

RE: 7.09 ohms (D4 in series)

Fs: 28.4 Hz

Qes: 0.511

Qms: 5.75

Qts: 0.469

Vas: 40.3 L

BL: 25.04 NA

Le: 7.7 mH

Mms: 252 g

BL^2 / RE: 88

600 watts RMS

Depth = 6.5"

Cut-Out = 10 15/16"

Enclosure Suggestions:

1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz

* Tune higher and use a smaller box for more SPL oriented setup (Use 1 - 1.5 cubes)

* Enclosure can be as big as 2.25 ft^3 with lower power levels

1.00 ft^3 sealed -- F3 of 44 Hz

* For SQ and space limited applications

[sundownz 197]

153.3 dB @ 47 Hz so far

I'll clamp the power shortly... but I don't think it is really all that much all things considered. HU is at -10 on sub control -- as far down as it goes. I had it at -4 to put up the 154.1 with the single Nightshade 15"

[sundownz 197]

Just clamped power... 4840 watts total power on my clamp. So about 1200 per sub on a burp to do that score -- this run was 153.4 dB as well, a tenth higher

[Kanaworm$ 292]

Very impressive!

[Derrick824 4]

Seriously impressive. 153s!

[kkk4 3]

two 3500D? or two 3000D?

excellente!

[sundownz 197]

two 3500D? or two 3000D?

excellente!

Two 3500D. I am not using the full power, of course, but I had two 3500s installed already

[DjFreddyFred 0]

Wow those tinsel leads are sexy

[fatjoe61682 14]

Look very nice. Remind me of my old armageddons

[pogothemonk3y 1]

Got mine today.

[sostl 1]

Just clamped power... 4840 watts total power on my clamp. So about 1200 per sub on a burp to do that score -- this run was 153.4 dB as well, a tenth higher

what was the rise?

[sundownz 197]

Just clamped power... 4840 watts total power on my clamp. So about 1200 per sub on a burp to do that score -- this run was 153.4 dB as well, a tenth higher

what was the rise?

Didn't measure rise. My clamp will give a power read out without breaking down voltage and current.