Soft Part Assembly And Basket

[BigCProductions99 21]

I Was Wondering if You Have An Assembly That Could Be Used For An Old 10" Kicker Competition 8 Ohm. The Extended Pole Stillwater Designs One, The Really Old One. And A 12-Spoke Basket. I Basically Just Want To Have Some Fun With This Motor. It's A Two Inch Coil. I Can Drill Holes In The Top Plate To Accomodate The Basket. Even If It Isn't Really Worth It, This Is For Fun And Basically For The Love Of The Hobby.

[NDMstang65 403]

Sort of doubt it..the 2" coils we have are very long..and have a very wide OD for a 2" coil.

[BigCProductions99 21]

Don't Know If That Helps.

[lee 2]

wow that takes me back when i had c12a subs.

[BigCProductions99 21]

Yeah, This Is One I Just Had Laying Around For A Long Time. I've Got An Old Assed Stillwater Designs (Dubbed The "Kicker", The Originator Of The Brand Name) That Was Made In 1990. It, Suprisisingly, Still Has A Very Good Suspension. The Cone Is Very Weak And Looks Prone To Folding, Though, And Has A Huge Motor For A Sub Of It's Size And Time.

[nem 2,019]

Yeah, This Is One I Just Had Laying Around For A Long Time. I've Got An Old Assed Stillwater Designs (Dubbed The "Kicker", The Originator Of The Brand Name) That Was Made In 1990. It, Suprisisingly, Still Has A Very Good Suspension. The Cone Is Very Weak And Looks Prone To Folding, Though, And Has A Huge Motor For A Sub Of It's Size And Time.

Does it have a bronco stamped in the motor and kicker in gold across the dust cap?

[BigCProductions99 21]

I'd Have To Sand The Back Plate To See If The Bronco Is On It, The Dustcap Is Bare. I'll Go Get It And Take Some Pics Of It.

[BigCProductions99 21]

[nem 2,019]

I see, those are some orignals. I ran 2 10's back in 1989 just like those. Take note of the small dust cap, you don't see that any more. Good luck on getting parts.

[BigCProductions99 21]

I see, those are some orignals. I ran 2 10's back in 1989 just like those. Take note of the small dust cap, you don't see that any more. Good luck on getting parts.

Don't Need 'Em, They (I Have A Pair, With The Original Boxes.) Run Just As Good As They Did In 1990.

[BigCProductions99 21]

Well, How About This Nick, I Have A Newer Model Comp VR That Has A Blown Coil (I Have Alot Of Kicker Stuff For Some Reason, Even Though I Hate The Brand.) It's A Dual 2, Like It Matters. It Has A Deep Voice Coil Valley And Is Also Wider Than Normal. Same As Before, I'll Put Up Some Pics And See If This Could Work, See If I Can Get A Basket And Soft Parts That Could Make This Motor Useful. Only Problem Is I Need Shims If I'm Gonna Set It Properly.