It's almost that time......

[bassahaulic 155]

Ordered my other SAZ-1000D today

Will probably be here Wednesday, so I will install it Wednesday.

The question still remains, strapped at 2ohm? Or separate operation at 1ohm each.

I understand strapping is less efficient, but that's ok. How about some options on sound, output, and heat build up.

[sundownz 197]

Effectively no difference except strapped is easier to set up... IMO.

[bassahaulic 155]

Effectively no difference except strapped is easier to set up... IMO.

So in the picture below, it shows two amps strapped. There are two sets of speaker wires, I only have one coming out of my box. Could I only use one set, or do I need to re-wire to get two sets?

[CrazyKenKid 64]

Effectively no difference except strapped is easier to set up... IMO.

So in the picture below, it shows two amps strapped. There are two sets of speaker wires, I only have one coming out of my box. Could I only use one set, or do I need to re-wire to get two sets?

so in the pic you are refering to there are 2 strapped amps and all 4 speaker terminals are in use correct? and you wnat to know if it is okay to use 2 of the 4 correct? is so then yes you cna do this! it is how i have my strapped sae1000d hooked up! (using only the outside ones or the inside ones!)

[rushnrun 14]

I've never seen an amp that "strapped" in that manner....

Never strapped my sundowns so I dunno...

the massive's , soundstreams, and swiss amps that I have all strap differently than that... check your owner's manual... (unless that's one of jacob's own diagrams...)

[CrazyKenKid 64]

like jacob said " strapped is easier to set up" and what could be easier then that lol! plus that pic came from jacob site i believe that is on the help section of the site!

[alexj01_83 6]

it was easier and loud when i strapped my two sundowns, all i had to set was one amp so all my speakers were on the same page, i stoped by wal mart and bought a set of rca's split em and used the on my br out and br in

[bassahaulic 155]

Effectively no difference except strapped is easier to set up... IMO.

So in the picture below, it shows two amps strapped. There are two sets of speaker wires, I only have one coming out of my box. Could I only use one set, or do I need to re-wire to get two sets?

so in the pic you are refering to there are 2 strapped amps and all 4 speaker terminals are in use correct? and you wnat to know if it is okay to use 2 of the 4 correct? is so then yes you cna do this! it is how i have my strapped sae1000d hooked up! (using only the outside ones or the inside ones!)

Yes that is what I am referring to!