NEW Nightshade Pole Plugs

[sundownz 197]

We have been using a plastic domed pole plug for our cooling option for some time now.

I decided to take a new route and these will be shipping as of orders placed today and beyond. They were made down the street here in Troutman, NC

Solid aluminum plugs!

The shape is a bit more aerodynamic than the old plug as well:

Also, being aluminum, the plug itself will soak up some heat.

[ChiTownTBird312 0]

Very nice

[ABXX49 20]

What is the power you can safely recommend with this option? Is it an option? Do ALL new ones come with?

[sundownz 197]

Starting today it is standard on all drivers.

[Duran 387]

I'll be sending one of my Nightshades in for a recone and cooling

[sundownz 197]

It will not fit original motors - the pole is a bit too small. We CAN add the plastic plugs to any generation motor and they work quite well anyway as we have used a few 100

[Duran 387]

It will not fit original motors - the pole is a bit too small. We CAN add the plastic plugs to any generation motor and they work quite well anyway as we have used a few 100

Jake, you told me to wait for the aluminum plugs then send them in for upgrades

[sundownz 197]

If your motors are not the very first run they will fit. I am assuming if we talked about it they are not that old ?

[Duran 387]

If your motors are not the very first run they will fit. I am assuming if we talked about it they are not that old ?

I got them before you started making them in house. For $285

[sundownz 197]

Hmmm... the aluminum may not fit then. If you *really* must have them I can probably get them machined down a bit.

[StripperMan 0]

woohoo i got the first set!! eat your hearts out!!

[sundownz 197]

Indeed First two built with the plugs - picked up today!

[Bigpimpin91 0]

Might someone explain to me why you would want to plug that hole?

[sundownz 197]

Re-directs air flow behind the former for better cooling -- a pole vent by itself is not a very effective cooling method.

You may notice on the Fi subs the BL and BTL have no pole vents,

[Duran 387]

Hmmm... the aluminum may not fit then. If you *really* must have them I can probably get them machined down a bit.

Jacob that would be great! I have calipers I can measure the inside diameter of one? What's the dimensions of your plugs?

[sundownz 197]

33mm -- I have a few old motors here and they just barely don't fit.

[ChiTownTBird312 0]

everytime i see a picture of a nightshade i fall in love with them

those things are beasts

[Duran 387]

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

[mm0142 0]

iI placed my order just yesterday is there any chance it will come with this option?

[Duran 387]

iI placed my order just yesterday is there any chance it will come with this option?

Starting today it is standard on all drivers.

[ncacoates 104]

Finally got them made.. looken good man!

[bassahaulic 155]

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

[Duran 387]

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

[bassahaulic 155]

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

That's going to cost Extra.....

[RobClay 20]

33mm -- I have a few old motors here and they just barely don't fit.

Mine is 30 mm

Ain't that a shame Duran.

Jacob said he would make some a little smaller for me

That's going to cost Extra.....

Mayb mayb not