SAZ-3500D Power Testing

[sundownz 197]

This is the "official" post to be linked in our sticky amp power testing post :

-----

This testing done on my Extech True Power meter a full 6-10 seconds in to the burp so we are not catching peak values:

http://www.extech.com/instrument/products/...399/380976.html

-----

HIGH VOLTAGE TESTING:

6x Powermaster D1000s used for testing

17.9 volts rest - did not measure voltage drop.

10,320 watts from the pair @ 1.5 ohms each after rise starting at 0.5 DCR

5160 each

11,470 watts from the pair @ 1.3 ohms each after rise starting at 0.5 DCR

5735 per amp

-----

12v SYSTEM TESTING:

Starting battery + 2x Powermaster D3100s used for testing

3980 @ 0.25 rising to 0.65 @ 11.2v (engine on)

2050 @ 1 rising to 2.44 @ 12.2v (engine off)

With a bit more voltage on tap you can easily expect more power.

[DjFreddyFred 0]

Thats Awesome :bigclap:

[kkk4 3]

sorption?amper?

[Raymond Farmer 4]

This is the "official" post to be linked in our sticky amp power testing post :

-----

This testing done on my Extech True Power meter a full 6-10 seconds in to the burp so we are not catching peak values:

http://www.extech.com/instrument/products/...399/380976.html

-----

HIGH VOLTAGE TESTING:

6x Powermaster D1000s used for testing

17.9 volts rest - did not measure voltage drop.

10,320 watts from the pair @ 1.5 ohms each after rise starting at 0.5 DCR

5160 each

11,470 watts from the pair @ 1.3 ohms each after rise starting at 0.5 DCR

5735 per amp

-----

12v SYSTEM TESTING:

Starting battery + 2x Powermaster D3100s used for testing

3980 @ 0.25 rising to 0.65 @ 11.2v (engine on)

2050 @ 1 rising to 2.44 @ 12.2v (engine off)

With a bit more voltage on tap you can easily expect more power.

I will be doing the same 12v system test, but with two NSB-g3100's.

[ncacoates 104]

looks awesome man. now when can i borrow one

[justin smith 0]

lookin good so far

[jeremyrizz 0]

I wanna see 4 of those in the jeep and numbers with 2 Monster 15's or the 2 NSX 15's!!!

[sundownz 197]

I wanna see 4 of those in the jeep and numbers with 2 Monster 15's or the 2 NSX 15's!!!

Me too Whenever Monsters are production we'll see it.

[Raymond Farmer 4]

Okay, I have done my SAZ3000D 12volt power test. I would like to say, WOW!!

My nominal ohm load was 0.5 ohms. I did plenty of test but I got the amp to do its power at the proper settings and did 3 test and took the average.

I used 2 x NSB-g3100 to power the amp, Starting voltage 13.2

Test 1

75.1 volts

39.9 amps

2996.5

box rise 1.88

voltage drop 12.2

Test 2

75.1 volts

37.7 amps

2827.5 watts

box rise 1.99

voltage drop 12.1

Test 3

76.0 volts

39.5 amps

3002.0 watts

box rise 1.9

voltage drop 12.1

Average of 3 test

75.4 volts

39.03 amps

2942.86 watts

box rise 1.92 approximately 2 ohms

So 2942.86 watts @ 2ohms @ 12.1 volts

That is some power!!!

Edited May 27, 2009 by Team Man-Up (Ray)

[TeamNemesis-DJ 5]

Okay, I have done my SAZ3000D 12volt power test. I would like to say, WOW!!

My nominal ohm load was 0.5 ohms. I did plenty of test but I got the amp to do its power at the proper settings and did 3 test and took the average.

I used 2 x NSB-g3100 to power the amp, Starting voltage 13.2

Test 1

75.1 volts

39.9 amps

2996.5

box rise 1.88

voltage drop 12.2

Test 2

75.1 volts

37.7 amps

2827.5 watts

box rise 1.99

voltage drop 12.1

Test 3

76.0 volts

39.5 amps

3002.0 watts

box rise 1.9

voltage drop 12.1

Average of 3 test

75.4 volts

39.03 amps

2942.86 watts

box rise 1.92 approximately 2 ohms

So 2942.86 watts @ 2ohms @ 12.1 volts

That is some power!!!

Nice Ray ...

[Raymond Farmer 4]

Why thank you, thank you very much!!!

[Derrick824 4]

Also when we did the 12v testing in my Explorer it was only at my peak burp frequency, not at box tuning. We would have seen more power at a lower frequency. I might need to do those tests again.

[jfin1204 2]

testing looks good.

Edited May 28, 2009 by jfin1204

[sundownz 197]

Thanks Ray and Derrick

[sundownz 197]

sorption?amper?

Testing from the factory indicates 5800 @ 1 ohm resistive @ 2% THD on 18v.

So my testing is actually pretty close to what the factory tested on a test load.

[acex3a 5]

i just want one.... gez to replace my 3000 ha

those are some awesome numbers