Axis 15 Kerf Port Box

[fritosaregood 0]

I decided to build a kind of fart box for a local comp to get higher scores. and while i was designing it i thought i could make a second port for daily use and shove it through my backseat. I wanted to get a box for two 15s in the car but the most space i could get with the design i had in mind was 2.375 cubes per sub and i want more. so ill be using this box for this month then work out a new design based on this new box to get 2 15s in my trunk. this box will be a little over 4 cubes, with an external flared port, and lots of threaded rod and carriage bolts.

i spent most of the day getting this far

[fritosaregood 0]

[nem 2,019]

Looks different. Can't wait to see the finished product.

[Mark LaFountain 1,054]

looks great.

[acex3a 5]

THATS DIFFERENT!

keep pics coming

[pear_b 1]

thats some skilled carpentry man!!

[fritosaregood 0]

thanks everyone.

i had to use a hand saw(whats that??) to finished the kerf cut cuz my tables saw wouldnt cut high enough

i should have more done tonight, then more pics.

[RobClay 20]

Anxious to see this done

[fritosaregood 0]

i got a little more done.

I got the holes drilled to mount the port and the t-nuts put in. started on the inside kerfs

[na_rsx 1]

seriously, this is the most unique flared port box i have ever seen

[efxtruck 0]

That's funky where did you get the idea??

[Adrian_D 520]

Good looking flares !

[sound=vibration 34]

sick ass port

[Duran 387]

Now that's nifty

[scottxgtr 9]

ive thought about doing something similar. good to see someone else pull it off since im too lazy to try.

nice work sir!

[Solid_State13 1]

looks really cool man, what made you decide to the port like that over a regular port or aeros

[fritosaregood 0]

thanks all of yall. I wanted one big port and i wanted it flared. the biggest aero port was 6 inches. i saw how to make kerfs, tried it, and it was pretty easy. So i decided one a big square flared port. It came out better than i thought

I have more done including an inside flared part, the pics will be up soon.

[jrod1050 5]

thats impressive. wish i had the time and skill to pull something like that off

[fritosaregood 0]

more pics.

[justin smith 0]

that is so SICK man post so vids asap

[fritosaregood 0]

that is so SICK man post so vids asap

i might not do a vid of this port because its tuned at 49hz for comps. but after i get the box in the car i can measure for my daily port. after that ones built ill make some vids

[fritosaregood 0]

I had a few finals today so i didnt get much done.

I got the top baffle on. i just using a single baffle because ill have threaded rod for bracing. I also sealed the edged with more fiberglass and made more 45's from resin. I didnt get to many pics of it since fiberglassin gets pretty messy.

I also got some toys today..sorta

^^ wat i get for bein on ebay at 3am I found some 3in air sander disk things 25 for $20 nice deal, some rubber grommets. 150 with different sized i think it was $7. and 2 fuse blocks.. i ran into a problem with my alt to batt wire got laid on my header and came about a millimeter from melting throught the wire loom and wire jacket. so now i wanna fuse both ends just to be safe. Ill get a pic of wat the wire looks like.

[fritosaregood 0]

I got a little more done

I cut the whole for the sub, put it some t-nuts, and put in the threaded rod. now i just have to find my small bolts to make the terminals. I used some carriage bolt with the theaded rod mainly to keep the bottom of the box close to flat so it lays down better

those expensive little things. almost $4 each

i had to screw that nut over 3 feet. then i had to do it again for the other one.

Edited May 9, 2009 by fritosaregood

[sound=vibration 34]

I got a little more done

I cut the whole for the sub, put it some t-nuts, and put in the threaded rod. now i just have to find my small bolts to make the terminals. I used some carriage bolt with the theaded rod mainly to keep the bottom of the box close to flat so it lays down better

those expensive little things. almost $4 each

i had to screw that nut over 3 feet. then i had to do it again for the other one.

looks fudgeing sic internal sshot

[todd.brust 29]

Party.