'02 Trailblazer

[Chevy350TPI 12]

34 ... pffft ... go with 22

[Nikuk 1]

34 ... pffft ... go with 22

<{POST_SNAPBACK}>

honestly, I want to... but I have lots of glass in this truck.

Seriously though... going to (read: one day) build 10ft^3 net tuned ~24hz. Figure 1200-1500 rms. whoooooooaaaa baby.

[Chevy350TPI 12]

Low end monster ... rattle teh f00k out of everything within a blocks radius.

[mrray13 30]

do it!! do it!!!

rrrrrrrruuuuuuuuummmmmmmmmbbbbbbbbbbbbbbbblllllllllllleeeeeeeeeeeeeeeeeee

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee "slayer:

[Nikuk 1]

For the time being the Optimas are not here yet. grrr... But for $160 each, I cant complain too loudly.

As it stands right now (ready to go) I've the stock '02 Delco batt and a freshly charged interstate Marine / RV battery. The stock 150 amp alt and so on.

I have yet to apply any deadening - other then the front doors... that'll be tested out in the coming weeks as I get to burping.

She's ready to go, baseline anyhow.

[Nikuk 1]

[Nikuk 1]

Rear seat line for reference:

[Nikuk 1]

Giving the 9915 first crack at it... apparently the basket cutout is a hair more then 14"

Soft porn for You all:

[02BlackOnBlackSS 1]

Lookin good.

[Nikuk 1]

BTW - that was 10hz (tuning is 48). No quotes on power though... havent set anything up yet.

Boy does this suck for music.... I'll make the plug tomorrow.

-Nick

[02BlackOnBlackSS 1]

Did the box sink in any when you put the sub in?

[Nikuk 1]

LoL... surely. Sub tips in ~58lbs... this box is only ~30lb so far.

[Supa_c 1]

Nice RCA's...

burp it yet ?

[Nikuk 1]

radio shack baby... Its just what I had laying around ATM. Minor details pfffft.

Nope, no burps yet. I only burp (at home) during the daytime when the neighbors arent home.

I'll tell yah though, Tones HURT.

LNT is anemic with this tuning though. LoL

[Supa_c 1]

tones...bah

do some low bass sweeps, there fun to watch

[Chevy350TPI 12]

Lookin' good

[Acidburn 10]

sweet pics Nick

[mrray13 30]

pretty nice pics there bub..only my soft pr0n was better...

rli8>dd9515 in soft pr0n beyotch!!

we wanna see the uber in there!!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

WEAK!

[Aaron Clinton 2,372]

damn Man, a 9900 with that much power is going to hurt someone in a daily install, let alone for competitions

[Nikuk 1]

damn Man, a 9900 with that much power is going to hurt someone in a daily install, let alone for competitions

<{POST_SNAPBACK}>

ummm.... sadly no.

Just got my new Fluke 333 clamp... impedance at 47hz? much worse then I feared.

[Nikuk 1]

BTW - Denim - Each (0.9 standing dcr) coil is reading 9.25 ohm at burp freq. Meaning that each 2500d in my truck is seeing ~9.25ohm, so ~300rms maybe from each. My early estimate says that I'll be getting ~700rms actual/total to the 99 (total) before clipping sets in hardcore.

Though, a NO TESTing done burp yielded 144.x on the Dash yesterday. That was without setting amps, HU, seats, or having the Blue Tops.

I'll set the equipment up and work with seating et al sometime next week. I'll put as much testing into this box as I can before I build another. Try to get a nice output gain from a higher box tuning (to get the imp spike moved).

I really dont wanna make a bandpass... but may have to If I'm gonna goto Steel Valley Regionals.

-Nick

Gotta month.

[Chevy350TPI 12]

Each (0.9 standing dcr) coil is reading 9.25 ohm at burp freq. Meaning that each 2500d in my truck is seeing ~9.25ohm, so ~300rms maybe from each.

[Aaron Clinton 2,372]

there is that much impeadance difference

thats unreal, its a shame to have over 5k available and use less than 1

[Nikuk 1]

working on it.