BL vs SSD

[AirFramerMack 3]

Well I have an AQ 1200d, I plan on running at .5ohm but with impedance rise I should be right at if not a little bit above 1ohm. I am wanting a sub that will just get nasty loud, and move some air. Its going in a 2-3^ft3 with 80sq inch of slot port. I am either going with a fully loaded SSD or stock BL....

[NDMstang65 403]

Bad idea.

Get dual 2ohm coils and wire in parallel.

You will break stuff..amp and sub both running at a .5ohm nominal load.

SSD won't like that kind of power either in the wrong hands...

[AirFramerMack 3]

with box rise i wont be at .5ohm and it wires down to .7ohm usually thats why i was adding all the options to the SSD to see if it was any better

[jonbearsmt 919]

with box rise i wont be at .5ohm and it wires down to .7ohm usually thats why i was adding all the options to the SSD to see if it was any better

[justin smith 0]

Bad idea.

Get dual 2ohm coils and wire in parallel.

You will break stuff..amp and sub both running at a .5ohm nominal load.

SSD won't like that kind of power either in the wrong hands...

i think nate would know

[Duran 387]

Bad idea.

Get dual 2ohm coils and wire in parallel.

You will break stuff..amp and sub both running at a .5ohm nominal load.

SSD won't like that kind of power either in the wrong hands...

i think nate would know

Do you mean Nick?

[AirFramerMack 3]

well after being wired to .7ohm and box rise it will be above 1ohm........

[lithium 358]

Bad idea.

Get dual 2ohm coils and wire in parallel.

You will break stuff..amp and sub both running at a .5ohm nominal load.

SSD won't like that kind of power either in the wrong hands...

listen to this guy, i think he knows his own product

[AirFramerMack 3]

just so i can get this right,it would be better to run the amp above what its built to run at?

[KU40 173]

It's obviously better than below. But you need a BL. The sub will need to handle the abuse you will undoubtedly send it.