SPL12 and 2 AQ2200s *VID*

[Skip01 0]

Testing one of these out before i order 4 more to complete the setup

Both amps @ .5, havent clamped them yet....i might do that today, but theyll do rated power from other peoples results ive seen

Full tilt not clipping the amps itll take the power all day long....when i clip it full tilt gets a bit louder but can start to smell after a min or 2 of a constant song.

Theyll be perfect with 4 2200s @ 1ohm on 4 12s..... :bigclap: :bigclap: :bigclap:

VID:

http://vimeo.com/4096369

[lithium 358]

nice!

whats with the holes drilled in the dust cap?

[Skip01 0]

nice!

whats with the holes drilled in the dust cap?

So i dont blow the dustcap off

[jonbearsmt 919]

i wonder if the sealed cap is needed for the cooling design?

oh and the type R vid pissed me off so bad.

[- Nickelz N Dimez - 0]

Maybe the holes in the dustcap are used for cooling..

[Skip01 0]

i wonder if the sealed cap is needed for the cooling design?

oh and the type R vid pissed me off so bad.

This is what Mark said, it was for backpressure to be released, i didnt do it if thats what you are thinking ha

Why Type R vid got ya mad?

[jonbearsmt 919]

oh ok.i though you had drilled the holes. my bad.

OH the R's///

because im doing a 143.3 in a trunked car. and a suv with 2 12 inch alpines and doing 146.XX

[mrogowski 6]

That's pretty good for R's...

[onebadmonte 235]

i wonder if the sealed cap is needed for the cooling design?

oh and the type R vid pissed me off so bad.

This is what Mark said, it was for backpressure to be released, i didnt do it if thats what you are thinking ha

Why Type R vid got ya mad?

I have a pair of SPL12's and they don't have holes in the dust cap. It this a recommended mod for those who don't have holes in the dust cap? Is there any noise with having holes in the dust cap? BTW interesting port setup. Can you elaborate on what you did? Thanks.

[mrogowski 6]

The reason I did that was on account that he told me he would be driving them *hard*...

[Skip01 0]

i wonder if the sealed cap is needed for the cooling design?

oh and the type R vid pissed me off so bad.

This is what Mark said, it was for backpressure to be released, i didnt do it if thats what you are thinking ha

Why Type R vid got ya mad?

I have a pair of SPL12's and they don't have holes in the dust cap. It this a recommended mod for those who don't have holes in the dust cap? Is there any noise with having holes in the dust cap? BTW interesting port setup. Can you elaborate on what you did? Thanks.

It helps it load a lot better than if it was just an aero out....keeps the cone under control better on the lows.

And no, no noises outta it....cept LOUDNESS

[johnecon2001 82]

That amplifier install is a bit scary... but the box looks sweet.

[Skip01 0]

That amplifier install is a bit scary... but the box looks sweet.

Yesss....4400 rated watts is scary to mere mortals

[JEREMIAH 0]

what kind of box is that?

[Thorshammer 1]

oh ok.i though you had drilled the holes. my bad.

OH the R's///

because im doing a 143.3 in a trunked car. and a suv with 2 12 inch alpines and doing 146.XX

No worries Jon I got ur back! No arrrrssssss are gonna beat this Trunk

Holla!

[slim2fattycake 85]

That amplifier install is a bit scary... but the box looks sweet.

Yesss....4400 rated watts is scary to mere mortals

I think he meant by the location and orientation of the install and not the amps themselves.

[Skip01 0]

That amplifier install is a bit scary... but the box looks sweet.

Yesss....4400 rated watts is scary to mere mortals

I think he meant by the location and orientation of the install and not the amps themselves.

I picked up that, hence my joke of a response.

Doesnt have to look like anything, as long as what it sounds like is nasty

[shizzzon 461]

those subs can handle more than that.

Benhemp used to have a strapped pair of sundown 3000ds @ 0.5 ohm on a single SPL12 and it be fine with it.

[Skip01 0]

those subs can handle more than that.

Benhemp used to have a strapped pair of sundown 3000ds @ 0.5 ohm on a single SPL12 and it be fine with it.

Yeh...it didnt flinch when i burped it