Sundown SA-12 D4 Pre-Order

[sundownz 197]

Pre-Order open as of now - be sure to get these while you can as I think the first run will go quickly.

ETA is mid to late June for arrival of these woofers. As always, with a pre-order the ETA is subject to change based on shipping delays, etc, etc. PLEASE do not pre-order unless you are okay with any delays that may occur.

Regular MSRP will be $239 dollars - right at our low 200s target

Shipped prices in Continental 48 states -- contact me for AK and HI -- USA ONLY pre-order!

Paypal me at [email protected] to pre-order.

$175 shipped for ONE

$330 shipped for TWO

$620 shipped for FOUR

Ask about more than that.

Two of them in my Jeep has done up to 149.7 dB in a box that is too big with too much port area, so they have great SPL potential.

Not only that - but they are GREAT sounding drivers with terrific low-end extension. They feature an aluminum shorting ring and a high linear x-max of 19mm one-way.

RE: 7.09 ohms (D4 in series)

Fs: 28.4 Hz

Qes: 0.511

Qms: 5.75

Qts: 0.469

Vas: 40.3 L

BL: 25.04 NA

Le: 7.7 mH

Mms: 252 g

BL^2 / RE: 88

600 watts RMS

Depth = 6.5"

Cut-Out = 10 15/16"

Enclosure Suggestions:

1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz

* Tune higher for more SPL oriented setup

* Enclosure can be as big as 2.25 ft^3 if you stick with the 600 RMS rating

1.00 ft^3 sealed -- F3 of 44 Hz

* For SQ and space limited applications

[clemsonhacker 0]

looks nice just what ive been hunting.. time to have a talk with the wife

[Kanaworm$ 292]

I wish I had a need!

Should be a great seller after seeing the prototype numbers.

[TeamNemesis-DJ 5]

They will be gone quick...

[js2tnz 0]

wish i had a need for it. been telling one of my friends about it. so i'll try and get him to pre-order one.

[Rumblebee22 0]

WILL HAVE TO WAIT UNTIL THEY COME IN AND ARE MSRP. VERY INTERESTED TO SEE REVIEWS THIS SUMMER.

[pogothemonk3y 1]

Payment sent. Thanks.

[Solid_State13 1]

how much power were you runnin in that jeep setup?

[sundownz 197]

how much power were you runnin in that jeep setup?

A bunch - IIRC I hit em' with about 2500 each on a burp.

In a proper enclosure they would do much better -- my box has too much port area and is too big for a pair of 12s

[sundownz 197]

looks nice just what ive been hunting.. time to have a talk with the wife

Do it!

[Rumblebee22 0]

just do it!

[sundownz 197]

A bit more in depth...

These drivers feature the same cooling arrangement I developed for my Monster SPL woofer therefore thermal power compression is very low on these drivers - the 600 watt rating is purely mechanical as these will handle substantially more thermally.

The coil is a 2.5" diameter / 45mm WW copper coil on an aluminum former.

We are using flat, tied down tinsel leads to avoid the possibility of slapping the cone.

Any more questions - let me know

[sundownz 197]

Anybody have any questions about these ?

[mattd0344 2]

Anybody have any questions about these ?

Would 4 cubes be good for two on a SAZ-1500D or would I need to go smaller with the box?

[DAM 1]

damm 4 sound nice with a 3500??????? hmmmmm

[sundownz 197]

Anybody have any questions about these ?

Would 4 cubes be good for two on a SAZ-1500D or would I need to go smaller with the box?

With anything over rated power stick to the suggest box size or smaller.

[sundownz 197]

These are in transit to me so the ETA for late June seems to be on track.

[clemsonhacker 0]

would my saz1500d be to much for one of these?

[sundownz 197]

would my saz1500d be to much for one of these?

It would be at 2 ohms so it would be just a little bit too much - you could *easily* run two with a 1500D.

[clemsonhacker 0]

would my saz1500d be to much for one of these?

It would be at 2 ohms so it would be just a little bit too much - you could *easily* run two with a 1500D.

yea i fig. that.... i would love to have 2 in my truck but i think i would have to lose my back seat and i cant do that... which i think i can squeeze maybe 2 cubes under it...hummm

[sundownz 197]

You can run two sealed in 2 cubes.

[sundownz 197]

I got word they should hit Charlotte customs around the 16th of this month Get your orders in now if you want some!

[masteryoda 2]

well thease be available in dual 2's?

[sundownz 197]

D4s only at first. We'll eventually get D2s in stock.

[masteryoda 2]

will these be reconabale too?