2 icon 12s

[high_score_1 0]

i was thinking about getting 2 icon 12s and i was wondering what would be a good amp to run them?

i would like to stay cheap but i want a good quality amp.

it probably be in the loaded enclosure from fisher customs.

so the specs of that box

[ABXX49 20]

What is cheap to you? Max budget?

[high_score_1 0]

well since the box from fisher customs loaded is like 700 i would like to stay around 700

Edited April 1, 2009 by High_score_1

[hiloracerboy84 0]

wow...700 isn't anywhere to be found in my dictionary under the word "cheap". haha but i guess that's just cause im cheap

Edited April 1, 2009 by hiloracerboy84

[hiloracerboy84 0]

oh, sundown 1500/3000d, IA 20.1?

[Aaron Clinton 2,372]

A quality amplifier that is between 750 and 2200 watts will be plenty to power both. Or what some have done, individual 700-1000 watt amps.

[high_score_1 0]

so 2 rockford t1000bds?

if i go with the rockfords should i go with dual 1 or dual 2?

[- Nickelz N Dimez - 0]

If your going to run the T10001bd amp and you are going to run two of them get dual 2 ohm voice coils..

Wire each sub to 1 ohm..

[ABXX49 20]

Preorder the 2000D from Sundown

[high_score_1 0]

If your going to run the T10001bd amp and you are going to run two of them get dual 2 ohm voice coils..

Wire each sub to 1 ohm..

thats what i was figuring on doing...

that would keep it close to my budjet to.

thank you guys for all the help

[Aaron Clinton 2,372]

so 2 rockford t1000bds?

if i go with the rockfords should i go with dual 1 or dual 2?

You don't have to do two amplifiers, just saying that some have. If you get these RF's, be easy on the gains and how hard you play the drivers, as I have seen plenty birthing in the 1400watts range. And that is well above the comfort level for thermal limits of the Icon.

[high_score_1 0]

hmmmmmmmmm alright i'll make sure to take it really easy. lol

[Jay-C76 333]

so 2 rockford t1000bds?

if i go with the rockfords should i go with dual 1 or dual 2?

A R/F T1500-1bd on 1 ohm...

Two dual 1 ohm coil subs FTW...

[Thumpper 266]

I have punched over double the rated RMS into the Icons and pushed them

as far as they are capable of going

I was un able to do any coil damage what so ever with a clean signal

but like any other sub it will come apart if over exerted with to much

power....the suspension can only take so much before it lets go

I would recommend staying close to the RMS rating with a good enclosure

and a properly set amp...you will get good life out of them and not void warranty

[indytrucks 1]

Preorder the 2000D from Sundown

This.

[///M5 2,833]

I'd recommend a single amp and not using 2.

[phresh 0]

If you want cheap then you can go with a refurb Sundown 1500. Thats what I did and it comes with a 1 year warranty. They are 350.

[high_score_1 0]

I'd recommend a single amp and not using 2.

does it work better? more power? or something like that.

i've always only have one sub at a time so i've always ran just one amp lol.