Box Build for 350zspl

[bjfish11 35]

This one is 3 cubes @ 35 hz for a trio of DD 1508's I believe. Used a pair of 4" precision ports and had to put an elbow on each. Box will be left bare and have all edges rounded over.

[ABXX49 20]

When you measure the distance of a aero port that is curved, do you take the inner side, the outer side, or an imaginary line in the middle?

[bjfish11 35]

When you measure the distance of a aero port that is curved, do you take the inner side, the outer side, or an imaginary line in the middle?

Down the center. In this case, the center length of the elbows was 10" IIRC.

[oxsign 1]

Very nice, I loved my 1508's. can you get a pic of the elbows?

[bjfish11 35]

Very nice, I loved my 1508's. can you get a pic of the elbows?

If I remember Ill get some pics next time I use them. But, they are just standard 4" 90* PVC elbows.

[350zspl 0]

SWEET

[Kanaworm$ 292]

Amazing work!

I love the look of the unfinished box. Alot of sanding to get it to look like that?

[350zspl 0]

Amazing work!

I love the look of the unfinished box. Alot of sanding to get it to look like that?

actually trupan has a better look to it over mdf when both are non-finished

so more the wood itself over sanding leaves that type of finish

but with exterior edges routed , woofers counter sunk, and trupan as the material , it comes out looking so nice no need to cover IMO

[bjfish11 35]

Amazing work!

I love the look of the unfinished box. Alot of sanding to get it to look like that?

Nope, not much sanding at all actually.

[350zspl 0]

Very nice, I loved my 1508's. can you get a pic of the elbows?

go to home depot

pvc plumbing isle

4" 90 degree elbow

you can source them there

Edited March 30, 2009 by 350zspl

[ABXX49 20]

When you make your initial cuts out of the sheet, do you use a table saw or a circular saw?

[bjfish11 35]

When you make your initial cuts out of the sheet, do you use a table saw or a circular saw?

Table saw all the way. Much better than a circ saw.

[Andrew as 0]

sick box. what kinda power are you going to push them with?

[350zspl 0]

saz 1500

[Kanaworm$ 292]

Where do you get Trupan at? Is it available at a local lumberyard, Lowes, Home Depot or Menards?

Edited March 31, 2009 by OldSkool_08

[350zspl 0]

Where do you get Trupan at? Is it available at a local lumberyard, Lowes, Home Depot or Menards?

not sure exactely were he is buying that wood at, but hes been using it for years

Edited March 31, 2009 by 350zspl

[Rumblebee22 0]

saw it at home depot for $49 a sheet i believe.

[350zspl 0]

saw it at home depot for $49 a sheet i believe.

let me know when you are ready to drop a saz 3k in your ram

i got a mint one for the low low $

[iocca 0]

judging by your username, is that going in a 350z?!?! i didnt know the trunks were that big. very nice looking box btw.

[350zspl 0]

judging by your username, is that going in a 350z?!?! i didnt know the trunks were that big. very nice looking box btw.

thanks

max exterior dimensions in a 350z

32x15x19