door hinge(es)? door popping against panels!

[kryptonitewhite 1]

yesterday out of the blue my car door started popping while I open it, not as bad when i shut it. in front the body seam is right up against the door seam, so the door is sitting forward... pushed/bent toward the front of the car.

The rear seam is now a big gap.

I checked the hinges, they dont look bent or like they have any play.

top hinge

bottom hinge

sorry this camera blows

I tried lifting the end of the door, there is no play, and visually the black rubber/plastic bushings look OK... bolts tight....

[าชกุศล 0]

looks like you pushed the door open to hard, one to many times. you usually see that when people have there door open in a parking lot and someone hits the door a little, or someone has there door open and backs up into something with there door.

the frame is probably bent a little where the hinges connect.

Edited March 24, 2009 by าชกุศล

[kryptonitewhite 1]

I compared it to the other side to see if there was a gap between the hinge and where it mounts, but both sides look the same, and when I open both doors all the way, they seem to go the same

[าชกุศล 0]

is it one big pop when you open the door?