amps

[superpuck13 0]

so i posted this question in the other forum aswell didnt know witch to put this but i was anting help on these 2 fusion amps i have and was wondern if they are good enough to power 2 15" bls fully loaded here are the specs:

Product Specifications

465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N

Linked Power Ratings @14.4VDC

1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

Max Power Rating: 2000 Watts

Max Current: 100A

Full Rated Power Distortion (Max) 1kHz: 0.45%

THD @ Rated Power 1kHz/100Hz: 0.3%

Frequency Response Hz (-3dB): 10Hz - 250Hz

Signal to Noise: >90

Variable Low Pass Filter: 12 dB/Octave

Bass Boost @ 45Hz: 12dB

Input Sensitivity: 0.2 - 8V

Input Impedance: 47K

Fuse Rating: 25A x 4

[superpuck13 0]

can anyone tell me if this amp is good or not or has anyone elt with fusion ams before here are the specs

Product Specifications

465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N

Linked Power Ratings @14.4VDC

1000 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

1800 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

Max Power Rating: 2000 Watts

Max Current: 100A

Full Rated Power Distortion (Max) 1kHz: 0.45%

THD @ Rated Power 1kHz/100Hz: 0.3%

Frequency Response Hz (-3dB): 10Hz - 250Hz

Signal to Noise: >90

Variable Low Pass Filter: 12 dB/Octave

Bass Boost @ 45Hz: 12dB

Input Sensitivity: 0.2 - 8V

Input Impedance: 47K

Fuse Rating: 25A x 4

[KU40 173]

Kinda strange that they don't double output when linked. Where does the other 500 watts go? But if they give about 1k per sub, that'll work.

Also, I merged your threads.

[superpuck13 0]

alright and i woldnt be hooking these two amps 2gether so i dnt think i have to worryabout losing the out put power that way. im just hoping these amps will be good to help pump out a high number

[BoomBoxB 0]

if you have 2 i would run them separately one on each sub, the bl can handle it with the options added no question.

oh yeah at 1 ohm each. if those amps run cool enough.

Edited March 24, 2009 by BoomBoxB

[superpuck13 0]

yah i deff would run them to each sub would i have to get a h/o alt or anything upgrade wiring and battery?

[BoomBoxB 0]

At least big 3 in 1/0 awg and a better battery under the hood, you might be fine after that.

[superpuck13 0]

i already have the big 3 done with o/1 and have 2 red tops but i was told i should get a btter alt so i was thinking ohio generator

[BoomBoxB 0]

if you have 2 batteries you should probably get hi-output alt, otherwise your alt is working its ass off to get the 2 batteries charged.

i just got my last one from mechman.

Edited March 24, 2009 by BoomBoxB

[superpuck13 0]

alright thnks for the help