From: SAE-1200D Sale Pricing

[snowbikeboy12 0]

.

Edited March 16, 2009 by burbank bass crew

[Mike. 0]

i read some were that these amps are not stable @ 1 ohm. is this true?

would be able to run a fi bl with dual 2 ohm coils off this amp @ 1 ohm without frying it?

No they are 1 ohm stable. Not sure about .5 ohm I know the SAZ line is just they aren't warrantied down to .5 ohm.

It would be a good match for the Fi BL, but this thing puts out about 1500w so as long as the BL can take that, otherwise be conservative with the gain.

[sundownz 197]

Where did you read they are not 1 ohm stable ?

They are 100% stable at 1 ohm.

[bassahaulic 155]

i read some were that these amps are not stable @ 1 ohm. is this true?

would be able to run a fi bl with dual 2 ohm coils off this amp @ 1 ohm without frying it?

No they are 1 ohm stable. Not sure about .5 ohm I know the SAZ line is just they aren't warrantied down to .5 ohm.

It would be a good match for the Fi BL, but this thing puts out about 1500w so as long as the BL can take that, otherwise be conservative with the gain.

Any ohm load below 1 ohm voids warranty.

[Mike. 0]

i read some were that these amps are not stable @ 1 ohm. is this true?

would be able to run a fi bl with dual 2 ohm coils off this amp @ 1 ohm without frying it?

No they are 1 ohm stable. Not sure about .5 ohm I know the SAZ line is just they aren't warrantied down to .5 ohm.

It would be a good match for the Fi BL, but this thing puts out about 1500w so as long as the BL can take that, otherwise be conservative with the gain.

Any ohm load below 1 ohm voids warranty.

I know but they are capable of being ran at .5 no problem, use to be warrantied at .5 too I believe.