CV Vega 12" SVC4

[jntar 15]

Came in the mail today. Gonna get a vid made and try to make a box for it if it doesnt rain too hard this weekend.

Thanks Nick

[Acidburn 10]

very cool man

[Chevy350TPI 12]

Looks nice.

"When subs were subs ..."

[Aaron Clinton 2,372]

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

[jntar 15]

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

<{POST_SNAPBACK}>

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

[Aaron Clinton 2,372]

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

its a fairly efficent sub, can't streech out the box at all?

[jntar 15]

great sub, put it in a massive ported box and sent it about 450, maybe tune in the 28 range

<{POST_SNAPBACK}>

biggest I can go is 2 cubes. GOD DAMN REG CAB!!!!!

<{POST_SNAPBACK}>

its a fairly efficent sub, can't streech out the box at all?

<{POST_SNAPBACK}>

mayyyybeeee

[jntar 15]

Both BBP6 and WinISD say 2 cubes after port and driver displacement @26.08 hz

That sound about right?

I am trying to figure out port area.

[Nikuk 1]

Welcome.

Definatly kick ass woofers.

I've had 6 of them over the years, prolly 5-6 single 12" boxes, never dissappointed.

Hmmm.... I lasted used one (not that one ) in 3.5 net tuned to 32 with ~350rms... in the grand am, trunk install.

If you're gonna run 2.0net with a low tuning... Try to squeeze in ~25-30in^2 of port. 35in^2 would be better though.

3.0 with 45in^2 tuned ~30 would make You a happy boy.

-Nick

[Nikuk 1]

BTW - in BBP6, it's a Vega (2003).

[Chevy350TPI 12]

[Supa_c 1]

For some reason ive never taken a liking to CV.

[Chevy350TPI 12]

For some reason ive never taken a liking to CV.

Just haven't heard them in a decent install or what?

I think you would like some of their stuff if you like the Shiva ... even the SE.

[Supa_c 1]

exactly

Theyre not the prettyest subs either

[jntar 15]

[jntar 15]

[Chevy350TPI 12]

Pfft ... you could do it

If you have the time.

[jntar 15]

Pfft ... you could do it

If you have the time.

<{POST_SNAPBACK}>

Time I do have its the knowledge to make it look good that I am worried about.

[Supa_c 1]

Q logic makes an 8" enclosure that fits in the console

[jntar 15]

Q logic makes an 8" enclosure that fits in the console

<{POST_SNAPBACK}>

Nah what I really want to do if I keep this truck for a while is, make the console with the console attached, have the box glassed all the way back and out behind each seat. about 4-5" thick from the back wall so I can have the seats all the way back. I am betting that I could get a good 3-3.5 cubes out of that.

[Supa_c 1]

prob can

would be pretty neat-o if you did do that

Dont give some lame ass excuse that you dont have enough knowledge