Help for 10"

[chico305 0]

HI,

Here is my first post !

I was wondering what is the best SPL 10" Subwoofer I can get for this sealed enclosure. For only 1 10"

I will be using an Mtx 7804 Mono Amplifier prob around 400-1000rms

A list of sub

RL-i10, 10w6, Re Se-10, Alpine type R 10" , Ground Zero 10" CZUW10 , JBL P1024, KICKER S10L7

Specs of Enclosure

Mounting depth - 6 3/16 in. (based on 6" magnet)

Mounting diameter - 9 1/8 in.

Total volume - .7 cu. ft.

Chambers - 1 (mono)

Width - 37 1/2 in.

Height - 12 1/8 in.

Bottom depth - 10 1/8 in.

Top Depth - 5 in.

Construction - American MDF

MDF thickness - 3/4 in.

Weight - 22 lbs. 1 oz.

Finish - Carpet

Quality - High (automotive)

Color - Charcoal

Sealant - Heavy duty silicone

Terminals - One (standard)

It has to be this enclosure

Thanks!!!!!!!!!!!!

[Duran 387]

Why do you want to put an "SPL" sub in a small sealed enclosure?

[chico305 0]

Pretty much, more like 60% Spl and 40% SQ

[Duran 387]

Why sealed?

[chico305 0]

its a custom build enclosure for my trunk , I know that's not a good idea

Edited March 10, 2009 by chico305

[Duran 387]

You can only fit .7 cubes in your trunk? Do you drive a Moped?

[chico305 0]

lol! no its a coupe but I want to keep trunk space

[Aaron Clinton 2,372]

Okay, lets start over. You are looking for a high output 10" sub that will play well in a small sealed box? And should I guess it needs to be dual 2 ohm or SVC 4 ohm for that amplifier?

[chico305 0]

yes , the highest output I could go with this enclosure

[chico305 0]

Like this

Edited March 10, 2009 by chico305

[Adrian_D 520]

The RLi 10 works well in that enclosure but it's definately not a high output subwoofer, especially in that enclosure.

I suggest adding polyfill to that box and using a more output oriented subwoofer, like the FI BL.

[chico305 0]

thanks, you think it would produce better then the others?

I saw a FI SSD10

Fs: 28.3 Hz | 27.6 Hz

Re: 0.75 Ohms/coil | 1.5 Ohms/coil

Qms: 4.17 | 4.27

Qes: .48 | .44

Qts: .43 | .40

Mms: 166g | 175g

Cms: 0.19mm/N | 0.19mm/N

Sd: 310cm^2 | 310cm^2

Vas: 25.6 l | 25.6 l

Spl: 82.7dB 1W/1m | 82.7dB 1W/1m

Bl: 9.3 N/A | 14.1 N/A

Xmax: 21mm

Rms: 800W

Sealed box: .2-.6 cuft

Ported box: .9-1.5 cuft @ 33Hz

Sub OD: 11.000”

Cut ID: 9.250”

Mounting depth: 6.000”

Displacement: 0.12cuft

Edited March 10, 2009 by chico305

[Home Audio Equipment 0]

Definitely go with the FI BL sub. I had to do about the same thing as you for my car. It sounds really good with good depth.