i getting two ssd dual 2 ohm 18'' subs

[Goulman40 0]

i was wondering how muc amplifierpower i would need and whatkind of amp to get?

[Duran 387]

Something that will to 1,500-1,600 watts RMS at 2 ohms. Kicker 1500.1 would, or a Sundown SAZ-3000D.

[cobracommander 0]

shoulda got dual 1s but kicker probably would be you best and cheapest bet, might be able to find one used

[cobracommander 0]

could do a pair of amps, run each one at 1ohm or strap a pair

[Goulman40 0]

what would the amplifier of choice be at dual 1 instead

same type of sub

[Duran 387]

Well with TWO dual 1's the amp I would recommend is the Sundown SAZ-1500D

[Goulman40 0]

so the sundown 1500 would handle both subs witno problem all the way to max peak power

[cobracommander 0]

sont ever say max peak power again, but yes it should work good

[Duran 387]

so the sundown 1500 would handle both subs witno problem all the way to max peak power

Just wondering, do you know what watts RMS is?

[Goulman40 0]

so would that amp onlyhave enough power tohandle those two subs?

or would it hve extra power?

[Goulman40 0]

continuous power

[cobracommander 0]

it would be good for 2

[Duran 387]

The SAZ-1500D puts out about 1,700 watts RMS at 1 ohm. You would run both.

[Goulman40 0]

im kina new to this if u canttell

how can you tell much power the amp will have to have for the subs

[mazzasec 0]

2 D2's = final load of 2ohm (rare to find an amps max output @2ohm.

2 D1's = final load of 1ohm (1ohm stable amps are EVERYWHERE)

Edit: Is that you in your avatar? Looks like your chitting your pants.

Edited March 10, 2009 by SEC

[Goulman40 0]

FlatwindCoil?

CopperCoil?

BP Power what does this mean