BTL BOX DESIGN

[calvin 0]

what is the best route to get a design box build for 2 15" btls? where does everyone else get their designs from?

[Mark LaFountain 1,054]

what is the best route to get a design box build for 2 15" btls? where does everyone else get their designs from?

you have a few options...

http://www.fishercustoms.com

http://www.poundthatsound.com

or others on the forums if they want to do it for free.

[calvin 0]

wanted to get something directly from fi. but yeah i know about them. they designed a box for me before.

[ChiTownTBird312 0]

doubt youll get a design directly from Fi...all youll get there are box recommendations(size, tuning etc)

Edited March 9, 2009 by ChiTownTBird312

[johnecon2001 82]

wanted to get something directly from fi. but yeah i know about them. they designed a box for me before.

Here you go. Directly from Fi.

http://www.soundsolutionsaudio.com/forum/i...?showtopic=7153

[ChiTownTBird312 0]

and if you got designs from fisher customs or pound that sound(dont know which one) there is the answer to your question right there....

[B7L|BL4Z3R 4]

scott made me a design for my 18 btl

[c0smo kram3r 0]

You're only pushing those two w/ 2500watts? If that size power, whey didn't you get smaller power handling subs?

But w/ PTS or Fisher Customs, you can't go wrong.

Edited March 10, 2009 by kram3r

[BKOLFO4 29]

You're only pushing those two w/ 2500watts? If that size power, whey didn't you get smaller power handling subs?

Because it has been covered a million times. . .Even with 100 watts, the BTL will still be the loudest sub Fi makes (of course there are more variables. . .maybe I should say "still has the potential to be the loudest sub Fi makes).

1000+ watts per sub is more than enough.

[BKOLFO4 29]

what is the best route to get a design box build for 2 15" btls? where does everyone else get their designs from?

PM me some maximum dimensions you have to work with and I will design something for you.

[c0smo kram3r 0]

You're only pushing those two w/ 2500watts? If that size power, whey didn't you get smaller power handling subs?

Because it has been covered a million times. . .Even with 100 watts, the BTL will still be the loudest sub Fi makes (of course there are more variables. . .maybe I should say "still has the potential to be the loudest sub Fi makes).

1000+ watts per sub is more than enough.

I am fully aware of this. I still don't think they would be much louder than say a pair of BL's & he could have saved some money. (At least off of that power.)

[BKOLFO4 29]

I am fully aware of this. I still don't think they would be much louder than say a pair of BL's & he could have saved some money. (At least off of that power.)

There are a lot of variable that will determine how loud the setup is, but look at this:

BTL 1w/1m SPL = 93.1 dB

BL 1w/1m SPL = 90.6 dB

That is a pretty good difference. Not to mention going from 1300-1400 watts per BTL to 2500 watts per BTL is less than 3 dB difference.

Brian

[calvin 0]

well i really didnt end up losing money in the end. i bought these from someone on the forum and he said that they have had very limited play.

pm sent and thanks.

[BKOLFO4 29]

PM replied.

[///M5 2,833]

You're only pushing those two w/ 2500watts? If that size power, whey didn't you get smaller power handling subs?

Because it has been covered a million times. . .Even with 100 watts, the BTL will still be the loudest sub Fi makes (of course there are more variables. . .maybe I should say "still has the potential to be the loudest sub Fi makes).

1000+ watts per sub is more than enough.

I am fully aware of this. I still don't think they would be much louder than say a pair of BL's & he could have saved some money. (At least off of that power.)

Your "thinking" isn't helping.

[calvin 0]

its always better to be on the outside looking in when M5 goes on someone!