Stealth SSD 10 install in my BMW

[faezich 0]

Hi,

after i got my new car i thought of building something small, possibly stealth...

I found some pics of the same car as mine on the internet..

So i ordered a Dual 2 Fi SSD 10 some days ago and great surprise, i got mail :bigclap: (Thanks to BladeIce)

I started building a little enclosure for the sub, about 1 cu @ 35 Hz...

OEM integration:

Enclosure

Finished

Wosk great, but it only plays the low notes nice, with high tones i have loud air tourbulences, but why???

Pleaaase help me!!

[REVpuggie 23]

Nice ! does that give sufficiant pressure in the big beemer ?

where in germany are you from ? close to the border to holland ?

[faezich 0]

Thanks,

yeah i like the output of this little thing, it also needs some time to break in.

Another thing is that i feed it with about 900 rms and it doesn't move that much.... And lots of Air noise..

Idk what i've done worng, i use a 7cm Aeroport....

Some Help?

And i live in the middle of germany, in Bavaria, but Holland isn't thaat far from me, 3-4 hrs...

[REVpuggie 23]

the answer in in your question , your port is way too small , needs to be at least a 10cm aeroport 60cm long at 35hz tuning

[faezich 0]

Chit..

But i dont have that big of an enclosure.. I should better seal it, or?

[johnecon2001 82]

If you want even sound, then yes sealing the box would be the best option

[faezich 0]

Will it sealed still play low??

[REVpuggie 23]

yes , it will still play low but with way less output ,

why not make a port ouside of the box ?

[faezich 0]

How?

I dont have any space left to make it stealth..

[REVpuggie 23]

to the left above the amp ? looks like there is room ......

[faezich 0]

You r right. I'll place the amp somewhere else and make a slot port right there..

How do i calculate this? Cause idk how big this enclosure actually is..??

Patrick

[bassahaulic 155]

First you got to know how big it is.

do you have the measurements for it?

[faezich 0]

I'll measure it after i finished eating :-)

Half an hr i'll post the dimentions ..

[bassahaulic 155]

Cool

It's good yall german people are up..... uhhhhh early? Late? W/e

Up when i'm up lol

[REVpuggie 23]

I'm not german .......

pm'd you with msn adress , i'll start up BBpro and AJhorn

[faezich 0]

It's 31x40x23 cm... Minus a few liters for the sub and curves wich will take about 5 liters

That makes about 1 cu ft..

Edited March 9, 2009 by faezich

[bassahaulic 155]

OH LAWD O_O

[faezich 0]

???

[johnecon2001 82]

Enclosures:

SSD 10

[faezich 0]

Ported box we recommend using .9-1.5 cubic feet @ 33Hz

And what wrong if i put it in 1 cu ft @ 35 hz?

New port will be outside so its more than 1 cube...

And i only need the sub for backup, not for competition, thats what my next project will be....

[faezich 0]

New slot port. Will be glued on tomorrow.... Lets see how it sounds...

[tripslipfall 0]

Ha, sweet you're using my wallpaper. :bigclap:

[faezich 0]

Yeah its really sweeet :bigclap: :bigclap: :bigclap:

New port works fine and no portnoise anymore. Gets a new amp soon. When im finished i'll post some pics if you like to.

[slim2fattycake 85]

nice job. good choice on the sub.