My F-150 Build NO 56K!!!!!

[dblover 0]

Internal bracing will do A LOT more good than doubling everything.

depending on the install. I do double baffle so that the box won't flex and try to fall apart making it stronger. Bracing helps but double baffling is necessary depending on what your building. For this one i would do it

[Duran 387]

Internal bracing will do A LOT more good than doubling everything.

depending on the install. I do double baffle so that the box won't flex and try to fall apart making it stronger. Bracing helps but double baffling is necessary depending on what your building. For this one i would do it

Most double baffles are to keep the sub(s) from ripping out of the box.

[dwright27 0]

if i feel the need to double everything up after the initial testing, then i sure will do. even if i gotta do it the morning before i leave for Daytona.

[bassahaulic 155]

I'm doing double baffle, with bolts. Then a third flush mount layer. lol

[dblover 0]

Internal bracing will do A LOT more good than doubling everything.

depending on the install. I do double baffle so that the box won't flex and try to fall apart making it stronger. Bracing helps but double baffling is necessary depending on what your building. For this one i would do it

Most double baffles are to keep the sub(s) from ripping out of the box.

no you do it so the pressure from the subs don't destroy it. If you got alot of power etc you wanna do it. I have seen alot of boxes flex due to not double baffling it( everything sides, bottom top). Like i said, some people need to do it, some don't. 1inch mdf will work to

Edited March 8, 2009 by bigt

[dwright27 0]

all in all this set-up is probably gonna get taken out soon depending on how much i like the sound.

i know what not to do now when building a wall so the next one should be plenty better. all in all though, im gonna have a port braced with 2x4's as well as like 6 braces inside the box from various other points. if this thing flexxes id be quite surprised.

[Duran 387]

Internal bracing will do A LOT more good than doubling everything.

depending on the install. I do double baffle so that the box won't flex and try to fall apart making it stronger. Bracing helps but double baffling is necessary depending on what your building. For this one i would do it

Most double baffles are to keep the sub(s) from ripping out of the box.

no you do it so the pressure from the subs don't destroy it. If you got alot of power etc you wanna do it. I have seen alot of boxes flex due to not double baffling it( everything sides, bottom top). Like i said, some people need to do it, some don't. 1inch mdf will work to

An extra layer of wood wont add nearly as much strength than some good cross-bracing.

[dblover 0]

whatever.....just giving my opinion. no matter what you use for bracing, it will flex

[Adrian_D 520]

plan was for 3 18's but i accidentally cut my baffle to short :rollseyes: so i just decided to go with 2.

Power will come from either a US Amps XT4000D @ 2 ohms, or 2 DD M80's Strapped @ 2 ohms.

has 225 amp alt and 1/0 big three. and big 3 throughout the truck.

going to switch subs out if i dont like them to much for something else ... we'll see what the ones i got on the way do

Aren't you using the Z1 ?

[REVpuggie 23]

plan was for 3 18's but i accidentally cut my baffle to short :rollseyes: so i just decided to go with 2.

Power will come from either a US Amps XT4000D @ 2 ohms, or 2 DD M80's Strapped @ 2 ohms.

has 225 amp alt and 1/0 big three. and big 3 throughout the truck.

going to switch subs out if i dont like them to much for something else ... we'll see what the ones i got on the way do

Aren't you using the Z1 ?

My thoughts exactly , thats a sexy amp !

[dwright27 0]

i sold the Z1 ALONG TIME AGO

i wish i wouldve never sold it now. how i miss it.

ill have a Z2LV soon though. as well as some 22" BTL's or Level 5 18's. whichever i decide to do.

[dwright27 0]

[dwright27 0]

bump for some comments

[Kanaworm$ 292]

Very impressive! That is gonna move some serious air!

[nem 2,019]

Very impressive! That is gonna move some serious air!

X2

[A2theR84 0]

when you powerin this up

[-M- 0]

That z1 is seexy! Nice build, looking good

[bassahaulic 155]

I got a comment for you.

But you got to PM me to tell me you are online to get it

[dwright27 0]

gonna glass the port brace in, the seams of the port and screw the back piece to the back wall then hope to work on the beauty panel before sbn ..... running outta time though cause i gotta be a ported box for 3 12's tomorrow as well :BULLchit:

[bassahaulic 155]

Welcome to T.B.C. =D

[dwright27 0]

Welcome to T.B.C. =D

w00t

[bassahaulic 155]

Oh yeahhhhhh

One person to let them know. Then I'm locking the membership applications for a while.

[dwright27 0]

well, everything is up and running.

i think i have to much port, and i DO have box flex on the back piece. not to big of a deal.

Rebuild coming soon.

pics anyone?

Edited March 11, 2009 by dwright27

[burton907 0]

yes please =]

T.B.C. ??

[dwright27 0]

Team Bad Company

and a short vid.

Like i said, home depot didnt have any whole sheets so i spliced one for the back wall. got another few braces to put in if i have time

short vid.

ill take some decent daytime vids tomorrow. got a bit of windshield flex

Even though im tuned at 35 it KILLS the lows.