Fi BL 15" 4.4 cubic too big???

[audiofever 0]

hey guys..i will just get straight to the point..... Is 4.4 cubic for a fi bl 15'' too much??? It has the P_Chamfer opt only... dual 1 ohm will be wired to 2 ohms on a MTX TA81001... oh and its tuned to 31.16 using re box calculator

[pear_b 1]

specs ask for 2.5-4 cf, how much power are you going to be running?

[BKOLFO4 29]

Tuned that low with that much power, it will be fine. . .

[audiofever 0]

specs ask for 2.5-4 cf, how much power are you going to be running?

Specs says 1000 @ 2 ohms the certificate says 1490@ 2 ohms

[audiofever 0]

Tuned that low with that much power, it will be fine. . .

Just leting u know its before speaker displacement... i feel alot better now thought i made a bad move...

[KU40 173]

It'll be ok. Manufacturer recommendations are just that, recommendations. They aren't concrete walls that you can't go past. It's just where they think the sub sounds the best and can handle the power they rate it for.

[jj1479 4]

Hi i was looking for a box size/portsize/lenght should use for 2 15"bl dual 2ohm coils? Just ordered on friday 2-13-09.

I emailed nick but no answer.

They will be in the back of a 05 ford escape powered by a crossfire VR2000D

[LittleMatt 0]

Im using a 6.3ft^3 box with a 5in. port for my 15, its hella loud. Thats before displacement as well.

[Duran 387]

specs ask for 2.5-4 cf, how much power are you going to be running?

Specs says 1000 @ 2 ohms the certificate says 1490@ 2 ohms

Which means absolutely nothing...

[audiofever 0]

i added some brace so i think it cut down on the size a lil.. thanksfor all the answers i would be doing the instal in like 2 weeks from now i would let u guys know how that goes...

[audiofever 0]

Im using a 6.3ft^3 box with a 5in. port for my 15, its hella loud. Thats before displacement as well.

And here i was worried lol!! Whats ur port tunning is this after Port displacements..