q's on setting low pass crossovers

[tweekerz 0]

should i set the amp and hu to match each other? ive heard of bypassing the amp's low pass crossover if thats even possible. any help would be appreciated.

[Tirefryr 1,742]

Yes, it's possible. Best to use one or the other, not both.

[tweekerz 0]

Yes, it's possible.  Best to use one or the other, not both.

<{POST_SNAPBACK}>

id rather use the crossover on my head unit, but how do i bipass the crossover on my amp?

[Supa_c 1]

set it to "full"

[tweekerz 0]

set it to "full"

<{POST_SNAPBACK}>

do you mean flat? set the slope to "flat" and adjust LPF to whatever on the hu? if i do that isnt it turning off the crossover on the hu and using the amp's crossover? and if i turn the slope to 6/12/18/24db/oct isnt that turning "on" the crossover on the hu and if i do that do i set my amp's crossover to a certain hz? sorry im such a confused newb.

[Tirefryr 1,742]

What are the exact settings on your amplifier and your head unit? Please list them separately.

[tweekerz 0]

What are the exact settings on your amplifier and your head unit?  Please list them separately.

<{POST_SNAPBACK}>

on my hu (alpine cda-9835)

crossover setting

LPF- 20hz to 200hz

slope- flat, 6, 12, 18, 24 db/oct

right now i have the slope set to flat. and the lpf set to 50hz.

amp crossover (hifonics 1500d)

lpf- 25hz-250hz

i have the amp set to 50hz i believe. but with this configuration "i believe" by setting the deck's crossover slope to "flat" i am bypassing the hu crossover and using the amp.

i am wondering how to bypass the amp's crossover. there is no switch to turn it on or off so i have to leave it adusted to a certain freq. any suggestions?

[bigger_george 2]

What are the exact settings on your amplifier and your head unit?  Please list them separately.

<{POST_SNAPBACK}>

on my hu (alpine cda-9835)

crossover setting

LPF- 20hz to 200hz

slope- flat, 6, 12, 18, 24 db/oct

right now i have the slope set to flat. and the lpf set to 50hz.

amp crossover (hifonics 1500d)

lpf- 25hz-250hz

i have the amp set to 50hz i believe. but with this configuration "i believe" by setting the deck's crossover slope to "flat" i am bypassing the hu crossover and using the amp.

i am wondering how to bypass the amp's crossover. there is no switch to turn it on or off so i have to leave it adusted to a certain freq. any suggestions?

<{POST_SNAPBACK}>

If there is no switch to turn off the crossover, just set it to the max, 250 hz then set your HU crossover.

[tweekerz 0]

What are the exact settings on your amplifier and your head unit?