Jump to content
Sign in to follow this  
TooLoud4You

Questions on double baffle

Recommended Posts

Hi I'm making my box for 2 12" Fi SSDs and I can get my dimensions from the RE box calculator but how could I calculate a double baffle into it? I have been thinkin about it and I can not think of how I can calculate it and keep it at 4 cubes.

Share this post


Link to post
Share on other sites

Just enter in what ever the thickness of your wood is less then your max depth. So if your using .75" wood and your max depth is 16" enter in 15.25" and when you add your double baffle it will be 16" deep.

Share this post


Link to post
Share on other sites

just build your box as you normally would. Then once you're all finished building it, slap another baffle on there. that won't interfere with internal box calculations at all.

Share this post


Link to post
Share on other sites
just build your box as you normally would. Then once you're all finished building it, slap another baffle on there. that won't interfere with internal box calculations at all.

If I did that I would have to cut out the port too or the baffle would stick out a little.

Share this post


Link to post
Share on other sites

just shave .75" off the port length and make the 2nd baffel identical to the first

Share this post


Link to post
Share on other sites
just shave .75" off the port length and make the 2nd baffel identical to the first

but would'nt that change the internal space?

Share this post


Link to post
Share on other sites

Not enough to make a difference... it doesn't have to be that exact...

it'll tune the box like .002hz lower.... (not an exact just a for instance) not noticeable...

Share this post


Link to post
Share on other sites

and with that being said... .75 extra length will make a bigger change than the slight increase of air space not displaced by the .75 length of port.

looking at about:

.5 hz change in tuning for adding length

and

.05hz for removing length-from the inside and adding to baffle/increasing net volume.

Edited by rushnrun

Share this post


Link to post
Share on other sites

i agree with what these guys already posted

u cant hear a 3\4" more or less of a port unless u r a audiophile & have really sharp ears

Share this post


Link to post
Share on other sites

I have a quick question to this topic... Is it better to have the first layer flushed inside the box and the 2nd layer on top??? If you would do that, you could glue and screw first layer from the sides and then glue and screw 2nd layer from the top... Does that make any sense?? :huh: Just wondering how to put baffle on my box...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×