Right parts?

[sandsnip3r 0]

what do i test it with? can i use a multimeter?

[Bobaflob 0]

what do i test it with? can i use a multimeter?

yep

[sandsnip3r 0]

if i dont have the amp can i test it? like if i grabbed my multimeter and turned the car on what would it say?

that 13.8-14.4 ideal?

and where would i buy a 200-300A fuse? how how much?

[Bobaflob 0]

If the 4 gauge is still ran you can check your voltage at the end of it.

[sandsnip3r 0]

yeah, i just went and checked at the end of the wires with the car off n all and got 12.5v

[sandsnip3r 0]

ok, so what wire should i get?

and if i got some of that welding like copper wire could i use that to run the power to the amp?

[sandsnip3r 0]

ok, ill probably want like 25 ft of the 1/0 AWG

EDIT: better http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318

that was the best i could find... could anyone find like 25' cheaper please?

Edited December 25, 2008 by sandsnip3r

[sandsnip3r 0]

with wire can i replace my 4 gauge power to my amp also? and i cant seem to find an appropriate fuse holer and fuse

its a hifonics 2600 so probably like 2400Watts

do i need like a 200 or 300A fuse?

please help

[sandsnip3r 0]

sorry for the quadruple post.... lol

FUSE HOLDER: http://www.tti-plus.com/Bluewave-Audio-Pla...ti-bw-anhs3.htm

FUSE: http://www.tti-plus.com/Bluewave-Audio-300...-anl-bw300g.htm

WIRE: http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318

WIRE RING TERMINALS: http://cgi.ebay.com/MONSTER-CABLE-25-FEET-...A1%7C240%3A1318

Will this work to replace the Power and Fuse to my AMP (Hifonics BXI 2608D).

And also to do the BIG 3?

Will this work? Thankyou for reading, please help a brotha out :-D