2 15" Fi BL

[CadillacMatt 31]

i thought of 1 ported.... idk

i want like a significant improvement... like SIGNIFICANT

Why don't you invest in something like a single 12" BTL then?

[sandsnip3r 0]

1 12"......?

and im looking for 2 18"s.....?

[johnecon2001 82]

1 12"......?

and im looking for 2 18"s.....?

You're looking at the BL's though.

The BTL is Fi's most efficient woofer. In the right box... this could do some serious damage to your car

[sandsnip3r 0]

can 1 12" BTL in an omptimumly ported enclosure compare to 2 18" BLs in an optimumly ported box?

[stealth 113]

if i were you, depending on what you listen to id say you just want it loud. honestly i think 2 12 bls or qs ported in a crip box maybe like 5 cubes after displacement with anywhere from 12-16 sq inches of port per like Fi recommends tuned to whatever you want. itll most likely smash your 2 15 type rs sealed, because ive played with type rs and no comparison i say. my friends 1 15 fi Q in a tline was louder and sounded better than 2 15 type rs i did in a crx.

[sandsnip3r 0]

well, besides arguing with you about what i want....

I dont know how to design a ported box... i built my ported box before, it turned out EXCELENT

if i have the design i can do it, its just that i have to be able to fit it in my car door,(if im doin the 18"s)

is there anyone who could help me out on here?

If anyone has AIM who could design the box that would be great, im on now, my name is the same as here.....

[sandsnip3r 0]

OK, im doing the 2 15" Q's Sealed...

[RobClay 20]

sounds good, you wont regret it

[seanbw 1]

1 12"......?

and im looking for 2 18"s.....?

You're looking at the BL's though.

The BTL is Fi's most efficient woofer. In the right box... this could do some serious damage to your car

i agree with john. your electrical won't be able to support what you're looking for anyways. doing one 15" btl right in a smaller japanese tin can will blow your mind, it also leaves you a high margin for error because they can take a serious beating. a single 15" was the most i could fit in my honda but done properly it wangs.

[sandsnip3r 0]

If i do 2 15" FI Q's in a sealed box, whould it make a difference if i put anything in the box? and like what would i put in?

im going for louder...

[seanbw 1]

If i do 2 15" FI Q's in a sealed box, whould it make a difference if i put anything in the box? and like what would i put in?

im going for louder...

i think you're looking for something like a bl or a btl in a ported box then, chances are you don't have the airspace or power to get two sealed woofers to perform the way i think you want them to. then again this is pretty subjective because your overall goals are unclear to me. what dimensions do you have for the box?

[sandsnip3r 0]

you think that ported would be better cause i dont have the room for sealed?

you have to go bigger for ported...

the box will be 18 deep, 16.5 high, 34 long

sealed

[seanbw 1]

you think that ported would be better cause i dont have the room for sealed?

you have to go bigger for ported...

the box will be 18 deep, 16.5 high, 34 long

sealed

that's perfect for a properly built 4cu @ 34hz enclosure for a btl... my single 15" enclosure is 18.5d 16h 33w

[sandsnip3r 0]

whats a BTL ported gonna be compared to 2 BLs sealed?

[RobClay 20]

whats a BTL ported gonna be compared to 2 BLs sealed?

bl's cant be sealed..

but a btl 15 in the right enclosure would most likely be louder. remember the btl's is Fi's most efficient/loudest sub

[sandsnip3r 0]

yeah, i meant 2 15" Qs sealed vs 1 15" BTL ported

just right now im going for louder, and i previously had 2 15" alpine type R's, so now im just going for louder than that,

but but of the two, which will be definitely louder...?

[ChiTownTBird312 0]

15" btl in the right enclosure would be louder than 2 15" Q's i think

Edited December 14, 2008 by ChiTownTBird312

[sandsnip3r 0]

with people sayin maybe and i think, that doesnt satisfy me much...

haha

its twice the cone area...

and i like saying 2 15"s over 1 15"

but if 1 is louder i wouldnt mind...

[sandsnip3r 0]

basically im wondering right now, whats 2 15" Alpine type r's sealed gonna compare to 2 15" FI Q's sealed

[seanbw 1]

with people sayin maybe and i think, that doesnt satisfy me much...

haha

its twice the cone area...

and i like saying 2 15"s over 1 15"

but if 1 is louder i wouldnt mind...

there's no way to guarantee one setup will be louder than the other, that depends entirely on your installation. if you want my opinion, in the space you have i am positive a single btl 15 in an optimal ported box will be louder than two Q's sealed that are scraping the bare minimum on size requirements.

[ChiTownTBird312 0]

with people sayin maybe and i think, that doesnt satisfy me much...

haha

its twice the cone area...

and i like saying 2 15"s over 1 15"

but if 1 is louder i wouldnt mind...

just because its twice the cone area doesnt make it louder.....

and would two type r's compare to 2 q's? it depends on a lot. the enclosure size, tuning, amps, wiring, car its in etc.....

you dont like the answers you are getting to your questions, but you are all over the place with your questions. you need to be more specific.

[sandsnip3r 0]

ok, right now, i know im getting 2 15" Q's

to compare... they will be in the same size sealed box... same amp (well, 2600Watt, not 2000Watt) but hifonics, same wiring..... same car....2000 hyundai sonata

nothings changing, just a more powerful amp, same brand, same product line

[ShaneSauce 2]

I don't understand your logic.

You want loud, you want more woofers but you want to go sealed.

I understand you don't have enough room for 2 15's ported but going from a 2 15 sealed setup to the same thing isn't going to give you the results your looking for.

I would go with the 15" BTL in the proper ported enclosure.

[seanbw 1]

I don't understand your logic.

You want loud, you want more woofers but you want to go sealed.

I understand you don't have enough room for 2 15's ported but going from a 2 15 sealed setup to the same thing isn't going to give you the results your looking for.

I would go with the 15" BTL in the proper ported enclosure.

sometimes people have to makes mistakes for themselves to figure things out. i feel that this horse has been beaten to death already.

[sandsnip3r 0]

what the fudge are you talking about....?

what dont you understand? i cant go sealed because i dont have the room.... the 2 15"s i had before were side to side and the top and bottom of the sub were flush with the box...

but going from a 2 15 sealed setup to the same thing isn't going to give you the results your looking for.

im not going to the same thing...?

im getting completely different drivers.... and more power...

from what it seems likeyou guys are saying, the 1 15" ported MIGHT be louder than the 2 15" sealed

so...? idk what you guys are really going for here.

sorry if i seem hard headed or something... just the might droves me away from it... idk why, but it does