Fi BL 15 Fully Loaded

[billystorms24 1]

Hi i just installed a hifonics bxi 2608 im running it at 2 ohm at 1700 watts. my box is tuned to 34 hz @3.5 cubes. my bl is over extending itslef so i turned down the gain. My question is what should i have the low pass filter set at right now i got it at around 75 i think thats too high. it kind of sounds messy. and if i turn it down could i put the gain a little higher?

Edited December 5, 2008 by The Storms

[NB50 206]

Where is your SSF set.

and I wouldn't put any more then 1500 watts to a bl.

[billystorms24 1]

Like 18hz my friend has a us amp 2000x hes putting 2000+ rms and it handles just fine

[NB50 206]

SSF should be higher, more like 30hz.

[billystorms24 1]

ok whats about the lpf?

[NB50 206]

That depends on the front stage and where it sounds the best.

[billystorms24 1]

so your saying my subsonic level is the onlything wrong?

[RobClay 20]

just play with it a little bit, try setting it to 35 at first, if you like the way it sounds keep it, if you dont keep going up

[akjay907 0]

mines at 28Hz