Welcome to the IHoP

[MKader17 332]

catching up in the H0P T0P

[///M5 2,833]

Long post.

It could be summed up too, that all the old painters I work with will use oil based if they want it to last.

Ah for a bathroom I guess that makes sense. The bathroom I am doing right now is just a water closet though so no real moisture without a shower or bath.

I doubt it would be needed then really Sean. Unless you had some powerfull thai food and your really breaking a sweat in there. Oil is a pain to work with. I'm at work right now with white hands and arms because I forgot that I needed more mineral spirits. We have 3 adults and one bathroom.... That shower gets plenty of OT.

When I repaint my exterior, I will oil prime that too. I'm usually an over kill guy if there is a chance of a problem.

My friends call me Captain Overboard sometimes so I understand the overkill

Just Sometimes???

That was me being wordy, you can omit the sometimes.

[Penguin4x4 1,761]

it also appears all of us are pretty talented at clogging the throne too.

Only cheap toilets. I've never been able to clog a gravity toilet with a quality flush system (Kohler Class 5, American Standard Champion 4, et al.) or a commercial toilet before

[topgun 262]

Time to go look at dismantling some rusty shelving... Then after all that is done we get to put some pultruded fiberglass square tubing and decking in as replacement shelves. This is for a moist room for curing concrete.

[dem beats 1,223]

Sean, about those fancy toto's. Are they all pretty much the same? They have 3 flushing styles. I think the cyclone one looks pretty... lol

I have been looking at getting a new john anyway as mine is short and seams to clog, which flusher is the best?

[dem beats 1,223]

has anyone had any luck with ferroconcrete?

I'm thinking about adding onto and patching my pond, and it looks much easier and more importantly cheeper than rebar.

[dem beats 1,223]

Long post.

It could be summed up too, that all the old painters I work with will use oil based if they want it to last.

Ah for a bathroom I guess that makes sense. The bathroom I am doing right now is just a water closet though so no real moisture without a shower or bath.

I doubt it....... over kill guy if there is a chance of a problem.

My friends call me Captain Overboard sometimes so I understand the overkill

Just Sometimes???

That was me being wordy, you can omit the sometimes.

In the same vein of me wanting a BMG, great varmint hunting weapon.

[topgun 262]

Long post.

It could be summed up too, that all the old painters I work with will use oil based if they want it to last.

Ah for a bathroom I guess that makes sense. The bathroom I am doing right now is just a water closet though so no real moisture without a shower or bath.

I doubt it....... over kill guy if there is a chance of a problem.

My friends call me Captain Overboard sometimes so I understand the overkill

Just Sometimes???

That was me being wordy, you can omit the sometimes.

In the same vein of me wanting a BMG, great varmint hunting weapon.

Hey, if you think you can stomach about 10$ every time you pull that trigger I fully support your decision.

[dem beats 1,223]

you can ammo for about 1.50 a shot if you buy it buy the case.

=)

[dem beats 1,223]

Only lady I would have liked to date would have been a farm girl. Sexy cowboy hat and boots... Yum

"There's only two things in life that make it worth livin'

That's guitars that tune good and firm feelin' women"

[Tirefryr 1,742]

Fuck.

[dem beats 1,223]

rough afternoon?

[topgun 262]

you can ammo for about 1.50 a shot if you buy it buy the case.

=)

If I'm playing with a .50 though, I'm probably going to be reloading and that involves 750gr A-Max and thats about 3$ or so a bullet.

[mrray13 30]

you can ammo for about 1.50 a shot if you buy it buy the case.

=)

If I'm playing with a .50 though, I'm probably going to be reloading and that involves 750gr A-Max and thats about 3$ or so a bullet.

i wanna know where one can get .50bmg for a 1.50, case or not. lowest i've seen in a long while was $6...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[topgun 262]

Ammo prices are re-god-damn-diculous right now. I'd love to find some cheap .380 and .45, but I know that isn't going to happen anytime soon.

[dem beats 1,223]

you can ammo for about 1.50 a shot if you buy it buy the case.

=)

If I'm playing with a .50 though, I'm probably going to be reloading and that involves 750gr A-Max and thats about 3$ or so a bullet.

i wanna know where one can get .50bmg for a 1.50, case or not. lowest i've seen in a long while was $6...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Right now, probably not. I do know a guy though....... he knows a guy. I have grabbed some 2,000 asorted rounds for free from him. Really good guy. Never had a need for .50 though so I never asked, but he mentioned he could get some. Probably still on a belt though....

[dem beats 1,223]

Ammo prices are re-god-damn-diculous right now. I'd love to find some cheap .380 and .45, but I know that isn't going to happen anytime soon.

I agree x2

I haven't looked for any for so long, now that I'm getting short I'm hurtin.. lol

[ABXX49 20]

[dem beats 1,223]

i'm so lucky that my mother in law and father in law are great people.

[topgun 262]

Fuck. I hate it when deadlines aren't conveyed to me and a professor comes down and wants his project done, and it wants it in two hours and I had no idea that he even needed it for this weekend.

[topgun 262]

Thankfully its something I can do in a couple of hours. Time to go fix this f' up.

[dem beats 1,223]

Fuck. I hate it when deadlines aren't conveyed to me and a professor comes down and wants his project done, and it wants it in two hours and I had no idea that he even needed it for this weekend.

story of my life.

[dem beats 1,223]

only it's my wife, not a college prof.

[MKader17 332]

T-80

[dem beats 1,223]

T-80

me too

any plans for this weekend. I'll be going crazy doing house crap, maybe work on my truck a bit too.