Welcome to the IHoP

[Acidburn 10]

How to replace the bank 1 O2 sensor on my car, you have got to be chitting me...

I'll wager a 6 pack to anyone that I can get this thing from the top.

per GM ESI

Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

2. Support rear of powertrain frame.

3. Remove four rear frame bolts.

4. Lower the frame no more than 76 mm (3 inches).

5. Disconnect the rear oxygen sensor electrical connector.

6. Remove the rear oxygen sensor from the rear exhaust manifold

.

wait they want you to unbolt the frame to get at the o2 sensor??? hahahaha

it's only a sub-frame

[Acidburn 10]

/\ TOP

[seanbw 1]

How to replace the bank 1 O2 sensor on my car, you have got to be chitting me...

I'll wager a 6 pack to anyone that I can get this thing from the top.

per GM ESI

Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

2. Support rear of powertrain frame.

3. Remove four rear frame bolts.

4. Lower the frame no more than 76 mm (3 inches).

5. Disconnect the rear oxygen sensor electrical connector.

6. Remove the rear oxygen sensor from the rear exhaust manifold

.

wait they want you to unbolt the frame to get at the o2 sensor??? hahahaha

it's only a sub-frame

oh just a sub frame? well that really makes a lot more sense, i mean an o2 sensor is what like 40 lbs and has 10 bolts on it, it would be unreasonable to have to unbolt the entire frame to get at it!

[seanbw 1]

look closely at this picture... do you see the...

.

.

.

.

.

dog who is a complete pussy about cold floors!

[topgun 262]

Just spent 140$ for two metal tubes with 4 wires coming out of them...

[Acidburn 10]

look closely at this picture... do you see the...

.

.

.

dog who is a complete pussy about cold floors!

DOGGIES!1!!1!1111

[Aaron Clinton 2,372]

Here poochie poochie!

[Aaron Clinton 2,372]

Looks like I am not going to make the local dbDrag comp this weekend, again.

[lee 2]

And shit am I ever old come Tuesday.

You're a whole day older than me

[lee 2]

ughh

[Godsmack 361]

Fuck work...........today has been boring as shit.

Work.........not do shit for 45 mins.........work...........not do shit for 30 mins............GAY

[JimJ 11]

Heh, don't have RTMS access...

[Acidburn 10]

Heh, don't have RTMS access...

:clap:

you know what they say about dissenters...

[JimJ 11]

[///M5 2,833]

God Damnit! Why does this girl have to live in wichita!

You know she puts out then.

[///M5 2,833]

How to replace the bank 1 O2 sensor on my car, you have got to be chitting me...

I'll wager a 6 pack to anyone that I can get this thing from the top.

per GM ESI

Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

2. Support rear of powertrain frame.

3. Remove four rear frame bolts.

4. Lower the frame no more than 76 mm (3 inches).

5. Disconnect the rear oxygen sensor electrical connector.

6. Remove the rear oxygen sensor from the rear exhaust manifold

.

wait they want you to unbolt the frame to get at the o2 sensor??? hahahaha

It is a GM so you are expecting differently??

[Aaron Clinton 2,372]

The fun continues.

[topgun 262]

How to replace the bank 1 O2 sensor on my car, you have got to be chitting me...

I'll wager a 6 pack to anyone that I can get this thing from the top.

per GM ESI

Heated Oxygen Sensor (HO2S) Replacement Bank 1 Sensor 1

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

2. Support rear of powertrain frame.

3. Remove four rear frame bolts.

4. Lower the frame no more than 76 mm (3 inches).

5. Disconnect the rear oxygen sensor electrical connector.

6. Remove the rear oxygen sensor from the rear exhaust manifold

.

wait they want you to unbolt the frame to get at the o2 sensor??? hahahaha

It is a GM so you are expecting differently??

I'm betting a 6-pack that I can get it out through the top with a crowfoot and a u-joint, I just can't find a fucking 3/8 u-joint to save my life right now. It'll wait till tomorrow.

[Duran 387]

Lookin forward to the pics man

And dude sorry to hear about ur girl man........Shit has to be tough

Thanks. She got out of the hospital this morning and shes fine now. she had her entire uterus scraped clean so she is a little sore. I also got your add on Yahoo Messenger. I added you.

[KU40 173]

ooooh new colors!

[seanbw 1]

Lookin forward to the pics man

And dude sorry to hear about ur girl man........chit has to be tough

Thanks. She got out of the hospital this morning and shes fine now. she had her entire uterus scraped clean so she is a little sore. I also got your add on Yahoo Messenger. I added you.

[KU40 173]

Christmas shopping, ughhhh. yeah, I'm kind of a Grinch. I don't really care about gifts.

[topgun 262]

ooooh new colors!

Werd. Kinda wierd.

[seanbw 1]

Christmas shopping, ughhhh. yeah, I'm kind of a Grinch. I don't really care about gifts.

amazon

[topgun 262]

It took a 7/8" crow foot, 3/8" u-joint, 12" extension, then a 6" extension, but I got the mother fucking O2 sensor out and the new one back in. Fuck you GM for wanting me to drop a subframe a couple inches.

It has been one hell of a day, the O2 sensor after the Cat came out with a 2' cheater bar on a 7/8" wrench, and a fricking propane torch on the bung.

Didn't help much I had to go exchange the first O2 sensor cause NAPA gave me the wrong damn one, and every idiot that owns a drivers license was around me. It has just been one hell of a damn day. Thank god for beer.