Welcome to the IHoP

[MKader17 332]

I noticed the other day that the 6.5 Pioneer coax's, with no deadening or amp in the Saturn really get low for what it is. I was listening to Three6 Mafia - Late Night Tip and there was actually a good bass presence. Which makes me think that the Saturn would be good for an SQ system

One vehicle at a time....

[JimJ 11]

The 2nd half of the day just goes so slowly

Supply chain...project management...VB...get dinner somewhere in there.

Really glad the torrent of VS 2008 worked, updated with SP1 and everything...

[topgun 262]

Having fun in asai?

Sean do you know anyone who might want some billiards tables? Both are beautiful solid wood. One is antique brunswick. 1.5 inch slate. That one is sexy, if I didn't have an HT I would keep it.

If I dont' find a home for these 2 tables The slate will end up in my shop and counter or in my yard broken up as flagstone....

I would dearly love to have that Brunswick but the only way I can afford it is if you basically give it to me free because that'll be a 350$ gas bill to get up there and back with the truck.

[topgun 262]

nice work on the caddy and happy birthday ryan

Thanks Sean

[topgun 262]

Each of those pieces of slate are 500lbs aren't they?

[dem beats 1,223]

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

I would go under the truck.... I'm almost thinking about it and I CAN go through the firewall. I think the 1/0 will look sloppy under the carpet.

[dem beats 1,223]

Each of those pieces of slate are 500lbs aren't they?

Eh I can shrug one on strapps. I would say closer to 350 or so... I'm not sure. They are really heavy though.

If you made the drive in the next week or so I would give it to you. I could know it went somewhere someone will care. It's a gorgeous table. Wood work is awesome. The only problem is a few MM in spread at the legs miter joints.

[dem beats 1,223]

I take it back. You will have to help me finish my truck! then you can have it.

[dem beats 1,223]

here is a link for the tables. Wife did the CL thing for me.

=)

http://minneapolis.craigslist.org/fuo/833393605.html

http://minneapolis.craigslist.org/fuo/833376720.html

[topgun 262]

Each of those pieces of slate are 500lbs aren't they?

Eh I can shrug one on strapps. I would say closer to 350 or so... I'm not sure. They are really heavy though.

If you made the drive in the next week or so I would give it to you. I could know it went somewhere someone will care. It's a gorgeous table. Wood work is awesome. The only problem is a few MM in spread at the legs miter joints.

If you are serious about just giving me the antique one I will make plans to drive up there the 20/21 of this month with a truck, trailer, and a friend or two.

[topgun 262]

I take it back. You will have to help me finish my truck! then you can have it.

I can help you work on it.

[vladd 26]

I need a program.....

i need to be able to make online "flash cards" where i enter in the question that it will show me, and to answer it i actually have to type in the word. It checks this against the word i told it was the answer and tells me if i'm right or wrong. need to be able to enter up to 200 different questions at least.

anyone know of something like this?

[dem beats 1,223]

Each of those pieces of slate are 500lbs aren't they?

Eh I can shrug one on strapps. I would say closer to 350 or so... I'm not sure. They are really heavy though.

If you made the drive in the next week or so I would give it to you. I could know it went somewhere someone will care. It's a gorgeous table. Wood work is awesome. The only problem is a few MM in spread at the legs miter joints.

If you are serious about just giving me the antique one I will make plans to drive up there the 20/21 of this month with a truck, trailer, and a friend or two.

Tell you what. I'm going to see if I can work the angles here for a few days see what I hear back from people, and go from there. The oak alone on the table would be a few hundred in cash, but I will completely entertain your offer depending on what the local table vultures want for it... if anything at all.

[Aaron Clinton 2,372]

On this day in 1956, Elvis Presley appeared on The Ed Sullivan Show for the first time. In 1947, the first actual case of a computer bug was found: A moth lodges in a relay of a Harvard Mark II computer at Harvard University. In 1926, the U.S. National Broadcasting Company was formed. And in 1839, John Herschel took the first glass plate photograph. Happy Birthday Michael Bubl

[topgun 262]

Each of those pieces of slate are 500lbs aren't they?

Eh I can shrug one on strapps. I would say closer to 350 or so... I'm not sure. They are really heavy though.

If you made the drive in the next week or so I would give it to you. I could know it went somewhere someone will care. It's a gorgeous table. Wood work is awesome. The only problem is a few MM in spread at the legs miter joints.

If you are serious about just giving me the antique one I will make plans to drive up there the 20/21 of this month with a truck, trailer, and a friend or two.

Tell you what. I'm going to see if I can work the angles here for a few days see what I hear back from people, and go from there. The oak alone on the table would be a few hundred in cash, but I will completely entertain your offer depending on what the local table vultures want for it... if anything at all.

Sounds good. If you can get cash for it do it.

[dem beats 1,223]

Yup. That could be my new projector sitting where those tables are if I get a bit of cash for 'em.

[Penguin4x4 1,761]

you know

if I park my car in the commuter lot at 10:40 on the nose, I mean on the lot, parked, me out of the car, bag in hand at 10:40, I shouldn't be 15 god damn minutes late to my fucking 11:00AM class

[Penguin4x4 1,761]

http://www.autoblog.com/2008/09/09/in-the-...ndai-accent-se/

[dem beats 1,223]

^^^^

That thing is a POS. The Genesis is interesting to me... very loosely interesting, but still.

[dem beats 1,223]

if you go to the website for the genesis it beats a porche in a race.. lol

[Tirefryr 1,742]

All is well. My brother placed an order with Summit and they mistakenly put it under my name. He paid for it though with his CC.

[JimJ 11]

^^^^

That thing is a POS. The Genesis is interesting to me... very loosely interesting, but still.

I thought some of those replies were funny. No possibility of excitement in a Toyota? Guess he doesn't realize they build more than sedans

[JimJ 11]

Or that fun doesn't stop where the pavement does...

[///M5 2,833]

I'm really really pissed with my sub install. It's such a damn headache to run the wire to the trunk. The center console have 10+ bolts holding it down. And to take off the seats as I had planned will require another special tool on top of the HUGE torques bit I just got. I want to deaden the floor, and really the firewall but this is retarded. Really really retarded.

I feel ya man. Seems like its always something. I do not have the easy to access hole in the firewall like M5 does and I own the same year truck both EC and both z71. I don't even have a drill bit big enough for the 1/0 so I'm going to have to get a unibit, and I am considering running the Power wire under the truck because its damn dear impossible to get a drill bit in a descent spot on the firewall.

On a good note though, box is on the way and seat lift is on the way! Still need an Icon...

Sean, is your truck LT?

Of course it is an LT, I don't buy stripped out vehicles. Full boat or bust. Crazy if that is the difference that causes the grommet to not be there. Perhaps calling it a grommet is misleading as it is covered in tar goop. Feel in the location for something that is like sticky silly putty and when you find it pull it out. It was just a hole in the dash with nothing running through it.

[///M5 2,833]

I noticed the other day that the 6.5 Pioneer coax's, with no deadening or amp in the Saturn really get low for what it is. I was listening to Three6 Mafia - Late Night Tip and there was actually a good bass presence. Which makes me think that the Saturn would be good for an SQ system

One vehicle at a time....

Except that it is a noisy pos and battling that is going to kill you.