Welcome to the IHoP

[Adrian_D 520]

guess what ?

[Adrian_D 520]

i scored 94% today

:woot::woot::woot::woot::woot:

[Adrian_D 520]

and that means....

FREE COLLEGE FOR ME

[///M5 2,833]

I too can't say that I have had a very good experience with my truck. Either way before going any further test it by disconnecting your newly attached wires and see if the gauge starts working.

As for the gains being off, if you don't hear distortion don't worry but do beware at higher volume to make sure you don't create issues.

ok, on the wires which end should I disconnect? Like is it safe to leave the + alt. attached and disconnect it from the + battery or should it be the other way around? and on the grounds, should I disconnect from the chassis or from the electrical source? Or should I just take the time to remove them all together?

I'll just keep the volume down until my o-scope arrives to be safe

-John

Have to pull the source side (or the other) so in this case, the pos battery and pos alt.

[///M5 2,833]

damn forgot to mention the Q is now housed in a 2.5 @ 28hz box

Mmm, 28hz.

[///M5 2,833]

Nice work and Congratulations Adrian!!!

[topgun 262]

and that means....

FREE COLLEGE FOR ME

:woot:

Nicely done!

[Adrian_D 520]

Nice work and Congratulations Adrian!!!

thanks

1 year's worth of studying payed off really nice...

[Adrian_D 520]

Ryan, what's the power rating on the sla 1 ?

8 ohm stereo to be more precise

EDIT :

if it's more than 35W i'm going to say F'it, sell the technics and prepare for a 2496

[Adrian_D 520]

now i have too much free time.

maybe i'll start reconditioning grandma's old sewing machine...

[///M5 2,833]

94% is impressive no matter what the test.

[topgun 262]

Its 100w.

[Adrian_D 520]

Its 100w.

weight guesstimate ? condition ? price ?

[topgun 262]

The weight is listed as 18lbs, condition is great, have factory packaging somewhere to ship it.

The thing is, I'm a little leary to sell it, its my 3rd amp for running 3-way active and it does it nicely but let me look around see what else I can find to replace it. The price would probably be somewhere around the 180 ish mark, but let me get back to you on it.

[topgun 262]

I have a madisound and PE order in....

Fostex FT17 from madisound and Eminence 12" coax PA drivers and some other toys from PE. Should be an interesting project.

[///M5 2,833]

No B&C?

[///M5 2,833]

tOp

[ILuvJDM 0]

i scored 94% today

:woot::woot::woot::woot::woot:

damn, you made that test your bitch haha

-John

[vladd 26]

congrats adrian!

[Adrian_D 520]

The weight is listed as 18lbs, condition is great, have factory packaging somewhere to ship it.

The thing is, I'm a little leary to sell it, its my 3rd amp for running 3-way active and it does it nicely but let me look around see what else I can find to replace it. The price would probably be somewhere around the 180 ish mark, but let me get back to you on it.

no rush. take your time and i will check to see what options i have in europe around that power.

the phonic max 250 looks tempting and i can try it out before i buy it

[Adrian_D 520]

hello fellas.

thanks again for the kind comments

[Adrian_D 520]

i want temperatures below 100, so i can start working on the jeep system

[Adrian_D 520]

I have a madisound and PE order in....

Fostex FT17 from madisound and Eminence 12" coax PA drivers and some other toys from PE. Should be an interesting project.

what beast are you building ?

[vladd 26]

i woke up for work 1hr early and didn't realize it till about 5min ago, damn i could have had more sleep

[///M5 2,833]

opposite for me. hard as hell to get up today